Hi,
As a newbie, I don't know if this is of any value...
1. I open up the Vision+ radio, connect it to RC Assist, turn radio and Vision+ on.
2. using a phillip screw driver i turn the gain screw inside the radio and the camera tilts up and down. From the RC Assist, I can see the movement as well...So I presume Channel 7 in Vision+ is already activated.
3. From the NAZA, i cannot see the X1 control..so I presume I cannot control the software gain/speed of the tilt.
My Extender is on warranty claim so I cannot test it with the DJI apps..control the tilt using the Apps and the mechanical gain in the Radio itself.
So, since my LHS does not have a Phantom 2 Pitch Lever in stock, I built myself one..without the presence of my extender (on warranty claim), i can control the tilt of the camera using the DIY (Channel 7) Lever at the bottom of my Vision+ radio.
Will post a short video of this test.
Anyone willing to try this, please do it at your own risk. If anyone wants to try this, try to control the camera tile both with the DJI aps and tilt level and see if both works.
just sharing.