Hello everyone! I’m having trouble with my second-hand Phantom 4 Pro (P4P) drone. Despite hoping to fix it, I’ve encountered several issues. I’m using a Phantom 4 Pro with a GL300F controller, and while I can connect the Go 4 app and see sensor feedback, there’s no video feed, SD card recognition, or GPS signal. Additionally, the camera buttons (record, image, camera angle, menu, C1, C2) are unresponsive. I attempted a firmware update, but it got stuck at 64%, and the drone turned off and on with red lights on the arms. If anyone has faced this issue and found a solution, please let me know. Otherwise, I might consider selling it for parts.
used drone p4p no video, no sd card, no gps signal
- Thread starter gnemeth
- Start date
Thanks for the advice i will try to find another drone and remote locally see if they willing to help.
Hey i am not at home right now but will check later what is it needed for?
To verify what you have. Not uncommon that you have something different than what you think.
P4P+ v. P4P+V2
Arrgh!! I purchased a used P4P+v2 and the controller has a built in screen. I'm not happy with the built in screen and want a more accessible interface so I purchased a controller that does not have a screen that I thought would be compatible and I could use a tablet. BUT. I was WRONG. I...
phantompilots.com
Oh i believe it is a phantom 4 pro. But i will post it here.To verify what you have. Not uncommon that you have something different than what you think.
P4P+ v. P4P+V2
Arrgh!! I purchased a used P4P+v2 and the controller has a built in screen. I'm not happy with the built in screen and want a more accessible interface so I purchased a controller that does not have a screen that I thought would be compatible and I could use a tablet. BUT. I was WRONG. I...
I’ve seen this several times in this forum. The model number is the answer.
Hi. I've got two of these and when I enquired with DJI about what model the WM331A is, they said that it was the Phantom 4 Pro. Gave them the serial numbers as well.
Hi. As per my previous post, you've got a P4P Pro. Or so DJI says. Same model number as my two. It's becoming difficult these days to buy spare parts as some are classified as P4P and others as P4P Pro, even when they are the opposite. That's why I contacted DJI to confirm what model I have. Finding genuine DJI parts is also becoming more difficult as there are a lot of claimed "genuine" parts, which actually are not. That's why I bought a broken P4P Pro because I hope it has all real genuine parts on it which I'll use for spares. My thoughts are, try to find a P4P Pro that's broken and use it for spares and repair your one. The Phantoms are still good Drones even though they are getting a bit on in years.
Could be something simple like a disconnected cable. First task would be to remove the camera assembly and see what may be hiding in that area.
Gimbal and gps points to power board behind battery connections. Look for burnt components or discolored areas, looose or broken conn.
Similar threads
