The other day I installed the new Phantom 3 RC HDMI module on both our Ph3Pro's. It is all working fine when I plug it into my HDMI monitor and I get a FPV view with overlay OSD as it should do on the HDMI monitor and as well as the normal App live view and display in my iPad mini and androids.
So HDMI signal output from the Ph3 RC HDMI module is confirmed to be working fine.
However when I plug the Universal HDMI/ Mini HDMI to A/V Conversion Module RCD3015
into the Ph3 RC HDMI out port I get no av output to my av monitor from it.
I tested the mini converter by unplugging it from the Ph3 RC and plugging it into my Sony camera HDMI out and it works fine to convert the cameras HDMI output from that to AV signal to my AV monitor.
I would have assume if both devices have an HDMI output signal it should work the same to convert both HDMI signals to AV using this converter?
It shouldn't make any difference but I did try to switch from PAL to NTSC and also 60hz to 50hz. but still no go.
Of course if I can get this to work, then I can use my Non-HD Domination Fatsharks on the Ph3 RC HDMI Module.
Appreciate if anyone suggest any ideas why this is not working?
jcampen, Aug 30, 2015
So HDMI signal output from the Ph3 RC HDMI module is confirmed to be working fine.
However when I plug the Universal HDMI/ Mini HDMI to A/V Conversion Module RCD3015
into the Ph3 RC HDMI out port I get no av output to my av monitor from it.
I tested the mini converter by unplugging it from the Ph3 RC and plugging it into my Sony camera HDMI out and it works fine to convert the cameras HDMI output from that to AV signal to my AV monitor.
I would have assume if both devices have an HDMI output signal it should work the same to convert both HDMI signals to AV using this converter?
It shouldn't make any difference but I did try to switch from PAL to NTSC and also 60hz to 50hz. but still no go.
Of course if I can get this to work, then I can use my Non-HD Domination Fatsharks on the Ph3 RC HDMI Module.
Appreciate if anyone suggest any ideas why this is not working?
jcampen, Aug 30, 2015