Hello guys! I am newbie to Dji phantom drones.. I bought P2 vision with modified gimbal and camera ..original was removed , Walkera 2D gimbal and for xiaomi and gopro was installed... Gimbal by itself works perfectly fine, all axis are stable and camera stays still... but when I connect the pitch connector of gimbal to phantom, the gimbal starts to work incorrectly ... I can tilt the camera up and down on my RC controller with no problem., BUT, ..when I tilt the drone forward , the camera starts to point up... if I tilt it more, the camera tilt up all the way.......the same thing in opposite situation ...when I tilt the drone back, the camera starts to point down... depends on how much I tilt the drone, the tilt of camera changes...generaly, it doesn't keep it's horizontal point......the "side to side" tilting works nicely and camera stays still but forward-back is not correct.. here is the video of that >
..I don't know how to fix it in assistant..it seems like some kind of phantom setting, because, as I said, the gimbal works nice , when I disconnect pitch control cable from the phantom......but I WANT to control the tilt of camera during the flight , so I am not satisfied with solution like keeping it disconnected . .. what are the possibilities? any experiences anyone? .solutions? .......firmware is updated to last version.. thanx for any help
..I don't know how to fix it in assistant..it seems like some kind of phantom setting, because, as I said, the gimbal works nice , when I disconnect pitch control cable from the phantom......but I WANT to control the tilt of camera during the flight , so I am not satisfied with solution like keeping it disconnected . .. what are the possibilities? any experiences anyone? .solutions? .......firmware is updated to last version.. thanx for any help