I'm sorry for being all over the place with this info. But I'm at this point I hope there is an easy fix like there was in the past
it's no problem at all to report problems/errors
fixing is easy part, but I need to distinguish which logs need to be adjusted
SMART_BATTERY.volumeConsume ... I don't even know what this is, so I can't tell if the values are ok or not - if I look into logs from my P3A or Mavic, they don't make any sense to me
Battery Cell #1, #2, #3 ... these values look fine for logs I've got
CALC values were added just recently and I explained that 1. they are for reference only, 2. they are calculated from GPS coordinates, so they won't be precise all the time
so there is nothing I can/will do about them
maybe I will remove CALC.hSpeed.running_max column as it is really useless
with CUSTOM.hSpeed (or any other potential columns) it's the problem I started to explain
for example for my logs these values are fine
and I suppose these values were also fine for your logs, but in one moment they started to be off
so if you want me to fix this, I will need cooperation of you and other users to find this moment, so I can distinguish, whether I read/write the values just like I did before or I need to use new method (in this specific case to multiply them by 10)
some of the possible detection signs could be logVersion (11th byte of TXT log), OSD.flycVersion or DJI GO version
and of course I need to know if it's only iOS relevant or it's valid for Androids too
if it's too complicated for you, then easier way could be to send me 2 consecutive logs, where first log's values are still fine, but second log's values are off
and I will try to adjust my tool according to information I'll get from them