I created a mission on my PC, then set up my Phantom 3 Advanced, got the props idling, opened the mission on my ipad, hit the button to load and start the mission - it loaded, and then I got a "mission ended" statement! The P3A took off and hovered at 1 foot.
The mission has no distances between WPs longer than 600 feet or so. It ends in the same place it starts from. The mission flies up a mountain, so the elevation changes about 1000 feet - however I have the max altitude set to 500 meters.
Also on that day, but not at the same time, my controller started beeping at me and I got a dialog saying I needed to recalibrate my sticks.
WHAT IS CAUSING all this trouble? I have flown many missions with this rig with no trouble until today. I am only here (Tucson, by the mountains) for a few days - I would hate to miss this chance! Any advice is greatly appreciated.
FWIW here's the mission. Mission Hub - Litchi
Thanks!
Steve
The mission has no distances between WPs longer than 600 feet or so. It ends in the same place it starts from. The mission flies up a mountain, so the elevation changes about 1000 feet - however I have the max altitude set to 500 meters.
Also on that day, but not at the same time, my controller started beeping at me and I got a dialog saying I needed to recalibrate my sticks.
WHAT IS CAUSING all this trouble? I have flown many missions with this rig with no trouble until today. I am only here (Tucson, by the mountains) for a few days - I would hate to miss this chance! Any advice is greatly appreciated.
FWIW here's the mission. Mission Hub - Litchi
Thanks!
Steve