Hi Pilots!
So, i have a P2V with a stock transmitter, two coverleaf antenna on the bird, and a 2D gimbal, i bought it used.
Circumstances:
No wind
K-Index:1
Compass calibration before the flight
GPS mode
I elevated the bird to 336m (1100 feet) the distance from me was 120m (390 feet), everythnig was fine except i feeled it elevating slower than before, but i just used my carbon prop first time (cause i broke the original one, and i don't have spare, just a carbons). So when i arrived to 1100 feet i tried to see down with my camera and the drone gone crazy like if she lost her balance (3:20 in the video). I started to descend with a slow forward and it is stabilized for a moment it said control signal lost but after it the sign is gone and i don't get the return to home message, when i was 100 feet i try to rotate it but it doesn't work i wander is it in rth mode but not because it not descending above the home point, os the rotate isn't work but as i see the roll is worked. The field where it descend was 15 feet higher than me (the home point), when it was above this field 30 feet i tried to stop but it doesn't do anything just continue the descend with that high speed not with the rth landing speed(6:00 in the video).
What could be the problem?
Thanks for your input!
The video is here:
https://www.youtube.com/watch?v=Gc0CuDV_KO8&feature=youtu.be
So, i have a P2V with a stock transmitter, two coverleaf antenna on the bird, and a 2D gimbal, i bought it used.
Circumstances:
No wind
K-Index:1
Compass calibration before the flight
GPS mode
I elevated the bird to 336m (1100 feet) the distance from me was 120m (390 feet), everythnig was fine except i feeled it elevating slower than before, but i just used my carbon prop first time (cause i broke the original one, and i don't have spare, just a carbons). So when i arrived to 1100 feet i tried to see down with my camera and the drone gone crazy like if she lost her balance (3:20 in the video). I started to descend with a slow forward and it is stabilized for a moment it said control signal lost but after it the sign is gone and i don't get the return to home message, when i was 100 feet i try to rotate it but it doesn't work i wander is it in rth mode but not because it not descending above the home point, os the rotate isn't work but as i see the roll is worked. The field where it descend was 15 feet higher than me (the home point), when it was above this field 30 feet i tried to stop but it doesn't do anything just continue the descend with that high speed not with the rth landing speed(6:00 in the video).
What could be the problem?
Thanks for your input!
The video is here:
https://www.youtube.com/watch?v=Gc0CuDV_KO8&feature=youtu.be