Oof, I'm Stumped

Joined
Jul 3, 2018
Messages
5
Reaction score
1
Age
19
I've got a problem with phantom 1,
when I connect a battery to my drone it flashes red, yellow, and green and my drone does not respond to my controller.
I tried using the Naza mv2 assistance, however, i could not connect my drone to the program itself. I made sure to install the driver needed for my PC to recognize the drone, and i followed a couple tutorials on youtube, but I just couldn't figure out the problem

Thought i should mention this all occurred after replacing the motors to the drone.

Thanks,
 
Joined
Jun 1, 2018
Messages
20
Reaction score
1
Age
75
Hello Jackson, if you are using Windows connect the phantom to a USB 2 port, not a USB 3 port, because, sometimes it works, but sometimes it doesn't work!) I don't know why. Verify also the cable you are using, some cables supplied with chargers, the data signals are not wired. Also check with the Device Manager, that a COM port with the name: "DJI USB Virtual COM (COMx)" is present. If it's not the case, reinstall the DJI Driver. Do not forget to allow the installation of unsigned drivers.
 

Recent Posts

Members online

Forum statistics

Threads
142,059
Messages
1,460,388
Members
103,842
Latest member
Sparkyork