Flying from inside house or car anyone?

[JohnnyB]

First test flight this morning, unfortunately a lot of fog so could only go out to just under 10000' away at 250' elevation over some farm land before losing video feed. Surprised by the amount of moisture on the camera/gimbal and bird when I brought it home! I will wait for better conditions before I rush to judgement. Still, very nice to sit in the car drinking coffee with my cinemizers on and this is farthest that I have been able to go with the P3A. Obstacle penetration seems very good and that's what I want it for, not distance. Made my buddy stand outside and spot for me, he was not so happy since it was a 18min flight! He's used to controlling the camera/gimbal on the inspire.

Awesome first run!! 'Only' 10,000 huh.. yeah you've gotta do some tweaking..lol

Sent from my XT1585 using PhantomPilots mobile app

 

[JaredReabow]

When i was in Croatia i flew from the car for the whole battery at max speed the entire way it lasted about 15mins from 100% to 10% flying 45MPH the whole way.
I had to fly high to avoid power lines, it was amazing!!!!.
(I had special permission from the government to fly my drone like this for a tv show.)
Ill edit it for youtube when i have time, it didn't make it into the show.
but yes it is very possible with a P4
Here is a P3P doing it:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[ebi718]

So, I did a test run this weekend with the following setup on my P4P.

TX: MP Dual band (2.4ghz/5.8ghz) low profile Omni antenna (link) connected to RF Linx 2400 SAXU booster.

RX/Video downlink: L-Com 2.4ghz 8.5 dBi Omni antenna (link) connected to L-Com 3 Watt 2.4 GHz 802.11b Indoor amp (see link -> HA2401DX-XL3000)

Amps connected;


For the (limited) test run at my local park, I went out about 2200 feet to get a feel of signal strength ; for subsequent runs I will try pushing the setup to outer limits and report back. PS: I used only the 2.4ghz downlink of the P4P as I wanted to test the MP on the TX end of the controller. During the next run, i will swap both to see how well the MP low profile omni does as a receiving antenna and then utilize the 5.8GHZ link. For now, this test was encouraging.

See 10+ minute Youtube video. (This was recorded off my Nvidia Shield K1 tablet using the native screen recorder.)

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Turbomania]

First test flight this morning, unfortunately a lot of fog so could only go out to just under 10000' away at 250' elevation over some farm land before losing video feed. Surprised by the amount of moisture on the camera/gimbal and bird when I brought it home! I will wait for better conditions before I rush to judgement. Still, very nice to sit in the car drinking coffee with my cinemizers on and this is farthest that I have been able to go with the P3A. Obstacle penetration seems very good and that's what I want it for, not distance. Made my buddy stand outside and spot for me, he was not so happy since it was a 18min flight! He's used to controlling the camera/gimbal on the inspire.

Nice run!! Darn near 2 miles out in the fog... Dam good...
Humidity effects signal. You were flying in water..lol


Turbo

 

[cstout]

TX: MP Dual band (2.4ghz/5.8ghz) low profile Omni antenna (link) connected to RF Linx 2400 SAXU booster.

I like this antenna so much. That would be perfect for a permanent install in my car. Very excited to see it work so well on this initial test. I'll be eagerly awaiting some distance tests!

 

[Kastnet Aerial]

Yeah the fog was crazy, unbelievable how wet the bird was upon return, hopefully this weekend's weather is better and I can try out the Inspire with the same system. Thanks again guys for the guidance and encouragement. Now I have to come up with some nice 12v hi def screens for inside the cab. Keep you posted with the next test results.

 

[Jeremiah Nelson]

Little testing with the l-coms and p4p set to channel 21 on 2.4ghz. Landed at 7 percent. Managed to stay under 250ft till about 20,000ft. Do you guys still plan to upgrade the stock 195 out of the magnetic base? Heck even my inspire 2 can hardly make a run like that. Obviously it can but not by much more.

 

[JohnnyB]

Little testing with the l-coms and p4p set to channel 21 on 2.4ghz. Landed at 7 percent. Managed to stay under 250ft till about 20,000ft. Do you guys still plan to upgrade the stock 195 out of the magnetic base? Heck even my inspire 2 can hardly make a run like that. Obviously it can but not by much more.View attachment 75771

Was that with your 240 modded magnet base?

Sent from my XT1585 using PhantomPilots mobile app

 

[Jeremiah Nelson]

Was that with your 240 modded magnet base?

Sent from my XT1585 using PhantomPilots mobile app

No it's just the stock 195 it comes with.

 

[JohnnyB]

No it's just the stock 195 it comes with.

Looked like a great little run to me! Yeah I'm leaving mine alone. I'm pretty much satisfied and set on the car set-up. Nothing left to do but flying.

Sent from my XT1585 using PhantomPilots mobile app

 

[Jeremiah Nelson]

Looked like a great little run to me! Yeah I'm leaving mine alone. I'm pretty much satisfied and set on the car set-up. Nothing left to do but flying.

Sent from my XT1585 using PhantomPilots mobile app

Exactly. Now I need a battery mod on something

 

[JohnnyB]

Exactly. Now I need a battery mod on something

'On something' LOL.. Well, if you can't find nothing, use my P4!

Sent from my XT1585 using PhantomPilots mobile app

 

[JohnnyB]

I've been considering modding the RC battery to provide power for the amps. Seems simple enough.

Sent from my XT1585 using PhantomPilots mobile app

 

[Turbomania]

Little testing with the l-coms and p4p set to channel 21 on 2.4ghz. Landed at 7 percent. Managed to stay under 250ft till about 20,000ft. Do you guys still plan to upgrade the stock 195 out of the magnetic base? Heck even my inspire 2 can hardly make a run like that. Obviously it can but not by much more.View attachment 75771

I am still using the bases with the 195 also. That LMR-195 isn't very impressive looking next to the 400..
But doesn't seem to hurt the distance any.

20K was how far I ran mine out with them on also. Ran out of balls before signal...lol
HealthyDrones.com - Innovative flight data analysis that matters
Check out notifications, Not 1 video drop out

I do seem to get a better video link in the trees with the L Com's rt. on the amps.
Not a night and day difference though.

Turbo

 

[Turbomania]

I've been considering modding the RC battery to provide power for the amps. Seems simple enough.

Sent from my XT1585 using PhantomPilots mobile app

Looks like a pretty straight forward mod and a great idea.
I see Nuclear powered amps in this thread by mid year...lol

 

[Jeremiah Nelson]

I like that idea a lot. But if there is one thing I hate charging it's definitely the remote.

 

[elarryland]

there are two red and two black coming out the battery pack I tapped my wires into both reds and both blacks after I found they come from the same place in the battery pack anyway


Sent from my iPhone using PhantomPilots

 

[Red Duster]

Try this.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Awesome !

 

[Turbomania]

Awesome !

That video cost me a rainy day fund...lol
Nothing like flying FPV!

 

[Jeremiah Nelson]

That video cost me a rainy day fund...lol
Nothing like flying FPV!

Oh no what did you do?