phantom 3 std link button HELP!!!!

[SebFalko]

hi guys ! sorry for my poor english i'm an old french people
I have the same problem and i tried to replace the old switch by a newer but it doesn't work could you help me ? which point i have to connect ???

thank you so much

 

[Hitech]

If you use this switch:

10 Pcs CESS? Tact Push Button Micro Mini Switch Momentary 3.2x4.2x2.5mm SMT SMD | eBay

you should solder all 4 contacts to the motherboard. It took me two hours to solder it, but that fixed it.

 

[Antiherome]

Does anyone have the size that will fit? I have searched Ebay for the ones shown but they are currently not in.

 

[Oso]

Does anyone have the size that will fit? I have searched Ebay for the ones shown but they are currently not in.

Have you tried this post?

P3 Standard Link Button Replacement?

You don't say what country you are in, but maybe you could try Amazon.
https://www.amazon.com/CESS-Button-Switch-Momentary-3-2x4-2x2-5mm/dp/B01FQE520C

 

[ifixwell]

here's the same, found on ebay today. Same I used.

5 Pcs 3.2x4.2x2.5mm Panel Momentary Tactile Tact Push Button Switch 4Terminals 601382202114 | eBay

 

[mauro310]

hi! for those who have their button fallen, i fix it by soldering 2 cables to the right contacts and placing an oem button in the shell. Try observing with a tester which of the four contacts are vital in order to link the rc!

 

[Andpao04]

Recientemente reparé con éxito mi botón de enlace perdido p3s. Usé pasta fundente en las almohadillas tanto de la placa como del interruptor nuevo. Un toque rápido con mi soldador a 750 grados y soldadura de núcleo de resina y volví al juego. El calor no afectará la placa.

 

[Andpao04]

aquí está lo mismo, que se encuentra hoy en eBay. Lo mismo que usé.

5 piezas 3.2x4.2x2.5mm Panel Interruptor de botón táctil momentáneo táctil 4 terminales 601382202114 | eBay

Do you have an instruction on how to change this button?