Hello,
I have a Phantom 3 Standard. I have flown a few out of range missions with Litchi. The drone points in the direction but does not point camera down. I understand the app cannot angle the gimbal if the drone is out of range.
From my understanding, after reading many threads on the topic, you can set an action to angle the gimbal at each waypoint. That is great! However, If I have a set specific "Tilt Camera" angle under the "Actions" tab, what do I set "Gimbal Pitch Mode" to? Disabled? Since I have an action set..?
Also, for "MISSION SETTINGS: Default Gimbal Pitch Mode" what would I set? Disabled, as well?
I have my waypoints around a POI, Now I just need to configure the proper settings that will let me manually adjust each angle at each waypoint.
Please Help!
Thank You!
EDIT: Litchi PDF says, "Interpolate: You can specify the gimbal pitch angle at this waypoint. If two or more waypoints have different gimbal pitch angles specified and are set to Interpolate, Litchi will automatically adjust the gimbal pitch to start and end at the specified angles and smoothly transition while traveling between the two waypoints."
So will I have the settings for both, "MISSION SETTINGS" and "Gimbal Pitch Mode" to "Interpolate"? Once I choose Interpolate, the angle is able to be adjusted... So then I dont need and action for camera tilt? OR is the interpolate angle only going to work when the drone is in range of the RC?
I have a Phantom 3 Standard. I have flown a few out of range missions with Litchi. The drone points in the direction but does not point camera down. I understand the app cannot angle the gimbal if the drone is out of range.
From my understanding, after reading many threads on the topic, you can set an action to angle the gimbal at each waypoint. That is great! However, If I have a set specific "Tilt Camera" angle under the "Actions" tab, what do I set "Gimbal Pitch Mode" to? Disabled? Since I have an action set..?
Also, for "MISSION SETTINGS: Default Gimbal Pitch Mode" what would I set? Disabled, as well?
I have my waypoints around a POI, Now I just need to configure the proper settings that will let me manually adjust each angle at each waypoint.
Please Help!
Thank You!
EDIT: Litchi PDF says, "Interpolate: You can specify the gimbal pitch angle at this waypoint. If two or more waypoints have different gimbal pitch angles specified and are set to Interpolate, Litchi will automatically adjust the gimbal pitch to start and end at the specified angles and smoothly transition while traveling between the two waypoints."
So will I have the settings for both, "MISSION SETTINGS" and "Gimbal Pitch Mode" to "Interpolate"? Once I choose Interpolate, the angle is able to be adjusted... So then I dont need and action for camera tilt? OR is the interpolate angle only going to work when the drone is in range of the RC?
Last edited: