Dual Battery Mod

[Mikepoo]

Any battery experts here safe to charge normal lipos 4.2v to 4.35v don't want my house going up in flames.

 

[Ed209]

Any battery experts here safe to charge normal lipos 4.2v to 4.35v don't want my house going up in flames.

Don't even think about it.

 

[dirtybum]

Any battery experts here safe to charge normal lipos 4.2v to 4.35v don't want my house going up in flames.

Don't even think about it.

I don't even know if your charger will let you

 

[Ed209]

If he sets his charger to lihv it will. But your are really risking damage and fire. If you try it do it outside.

 

[Mikepoo]

Ok, thanks guys just saved my house from burning down.

 

[Lee SK]

I don't even know if your charger will let you

Charging Multistar 5200 : Is setting lihv - 4S - 5.4 amp, is collect?

 

[Ed209]

I charge at 1C 5.2A LiHV setting (4.35v). No rush to charge this thing any faster.

 

[Lee SK]

I charge at 1C 5.2A LiHV setting (4.35v). No rush to charge this thing any faster.

My charger just control : select - Lihv / how many cell / 5.2A ( how can i set 4.35v ? what is mean 1C?)

 

[Ed209]

What charger is it? If it only says LiHV then that is 4.35v setting. But you should be able to control the amperage as well.

 

[Lee SK]

What charger is it? If it only says LiHV then that is 4.35v setting. But you should be able to control the amperage as well.

What is mean 1C?

 

[Ed209]

What is mean 1C?

Charles-Augustin de Coulomb's C-Rate for Batteries

C'mon Lee...A little work huh? You want this info on a silver platter?

 

[Lee SK]

Charles-Augustin de Coulomb's C-Rate for Batteries

C'mon Lee...A little work huh? You want this info on a silver platter?

Just understand ㅠ.ㅠ Thank you ...What is mean Multistar 4000 ---> put 4000 Multistar 5200 ---> put 5400 ?

 

[Lee SK]

What charger is it? If it only says LiHV then that is 4.35v setting. But you should be able to control the amperage as well.

 

[Tommymonkey]

Charging Multistar 5200 : Is setting lihv - 4S - 5.4 amp, is collect?

Setting is LiHV 4s 1A or 2A that how I charge mine.

 

[Lee SK]

Setting is LiHV 4s 1A or 2A that how I charge mine.

1A or 2A ? isn't it too low? i think 5.2A because 5200mah...

 

[Lee SK]

What charger is it? If it only says LiHV then that is 4.35v setting. But you should be able to control the amperage as well.

Lihv / 4S / 5.2A is it Okey?

 

[Mikepoo]

1A or 2A will be fine. Just takes longer to charge

 

[Lee SK]

1A or 2A will be fine. Just takes longer to charge

Thank you ^^

 

[Ed209]

View attachment 55210

Lee I can't tell the settings on that charger. If it has a LiHV setting then that would be pre-set to 4.35v per cell. LiPo is 4.2v. You have to read the documentation.

Setting is LiHV 4s 1A or 2A that how I charge mine.

That's way too low but it will work and just take hours. I charge at 1C which is 5.2A and well below the recommended max charge rating of 5C. Just do a little research and it's all there for you. Look at the product config table.
Multistar LiHV High Capacity 5200Mah 4S Multi-Rotor Lipo Pack

 

[Lee SK]

Lee I can't tell the settings on that charger. If it has a LiHV setting then that would be pre-set to 4.35v per cell. LiPo is 4.2v. You have to read the documentation.

That's way too low but it will work and just take hours. I charge at 1C which is 5.2A and well below the recommended max charge rating of 5C. Just do a little research and it's all there for you. Look at the product config table.
Multistar LiHV High Capacity 5200Mah 4S Multi-Rotor Lipo Pack

Yes! I got it. my setting will be : LiHV / 4S, 14.8V / 1C=5.2A Okey?