msinger
Approved Vendor
- Joined
- Oct 30, 2014
- Messages
- 31,965
- Reaction score
- 10,787
- Location
- Harrisburg, PA (US)
- Website
- phantomhelp.com
You're right. But, I believe everyone in this thread is talking about the 4K camera on the Phantom 3 Professional.The 4K doesn't have Lightbridge
According to DJI, there is no driver to activate the cooling fan (the little fan on the top of the camera board). Can you confirm if the firmware upgrade enabled the fan to spin?
The post above yours (#25) is correct.Anyone know for sure????
Few questions, does changing the gimbal invalidate your warranty and where can I get the gold Professional badge for the front of my phantom
Yeah I guessed not opening it up would help with the warranty. As for the badges, there has to be someone that sells them. If I had to replace my shell with DJI do they not come with replacement badges?It should not as long as you dont open up the bird.
Its a couple of cables only on outside.
I dont think you can get the badges as a spare.
Though you can get the sticky ones for the arms.
You can use the existing cable (it's the same cable on the P3A & P3P). If you need a new one, you can buy one from Amazon or directly from DJI.where can I buy the little cable that attaches it to the mother board?