Phantom 3 gimbal guard 3d printed from clear PET

Joined
May 4, 2015
Messages
243
Reaction score
86
G_8_small.jpg
My new design for a Phantom 3 gimbal guard. It's 3d printed from clear PET filament.
Here is the link to my eBay listing. I have other stuff listed for the Phantom 3 as well.
Thanks,
Nathan
Milehighdesign
http://www.ebay.com/itm/DJI-Phantom-3-Gimbal-Camera-Guard-3d-printed-from-Clear-PET-/111680759024?
G_1.jpg
G_6.jpg
 
Last edited:
Any idea how this compares to the strength of carbon fiber?
 
The carbon fiber will be stronger I am sure. I wanted to make something that was clear or transparent and easy to install, but still added a layer of protection for the gimbal and camera. I do have a carbon fiber mix ABS I might try next.
 
At the least, this is certainly a good option to attach a GPS tracker.
 
Looks cool. So it just snaps in? Does that mean it's going to be popping off easily when bumped?
 
It's not that easy to get off. It would take a Large hit to just pop off. There is just enough give to get it in. You could always zip tie it in if you want an absolute solution. I played around and flew it a few times with no issues. My thought was having something there is better than not.
G_10.jpg
G_8_small.jpg
 
Just received today on time super fast order than you, received my ND filters too.
Could not be happier.
Clipped right on with no trouble.
 

Members online

No members online now.

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,935
Latest member
Pauos31