P3P A/C motors or giros

[Bruce P]

After powering up the A/C w/o props ,I tilt it forward and back then set it down..The motors are still thinking it’s off level . I can move the throttle and is slow to respond .I did a IMU calibrate still the same issue. I tried with props on and it just to unstable it just flipped and motor made a horrible screech. Any clue to the issue I’m having. I’ve never flew this phantom before.

 

[KachemakDiver]

Is there any error messages on the device screen when doing these actions?
Almost sounds like an accelerometer issue in the IMU.
The Tech gurus here will most likely ask you to download the flight data so they can see what the bird is actually doing.

 

[Bruce P]

I did not do a IMU calibration I thought I did but it was a gps calibration.I am using cheap propellers from eBay which is causing the unstable flight.

 

[KachemakDiver]

I did not do a IMU calibration I thought I did but it was a gps calibration.I am using cheap propellers from eBay which is causing the unstable flight.

It won’t hurt to do the IMU calibration.

 

[Bruce P]

Anyone have a trustworthy site in the USA to order authentic P3P propellers. I don’t trust eBay anymore since 3D printing.

 

[Drone Freedom27]

Amazon always and you are 9450 my dad has the P3P we get our props from amazon they always have the DJI symbol on them and of course DJI packaged.

 

[Bruce P]

I bought a new set of genuine props and I’m amazed at how it flys now.