Thanks to DJI and the forced update of their app to 3.1.3, I now have a P3p that doesn't lock onto a single satellite! Story goes as such...
After upgrading both android devices to the new 3.1.3, I was not able to get my remote to communicate with my RC for a few days. After much pain and unwillingness to upgrade, I updated everything to the newest FW - This got me up and flying again
RC 1.8
AC 1.10.009
App 3.1.3
However, the video signal was complete garbage from what I was used to on my previous setup.
RC 1.03.0020
AC 1.06.0040
App 2.9.1
With 15-17 satellites, per usual, I was testing a waypoint route in Litchi to determine if I could use it to get better distance. I would hardly be 300ft away in an open field and it would tear and freeze so badly I had to land because the FPV was unusable. I changed from F mode to P mid air to cancel the Litchi route and regain manual control and land. After force quitting Litchi and attempting a quick change over to the DJI Go app to try a Custom channel (the Litchi selection wouldn't work), I attempt to try another flight...To my surprise I had 0 satellites in both apps (Litchi, Go) and on both Android devices! After I had landed, until now I have had 0 satellites.
I am still stuck with no GPS signal regardless of what FW version RC, AC, device, or App I have (I downgraded each with no results), which leads me to believe that I have a hardware issue. However, this all happened because I switched apps and/or flipped the switch on my RC, so I haven't ruled out software yet either.
I have logs from my updates that I can share if they will provide helpful information
Currently at:
RC 1.6
AC 1.9.6
App 2.6.1
Before I crack open my bird, my questions are:
Is GPS signal received from both the AC and RC, or just AC?
Would there be a setting or something that can shut off GPS entirely?
After upgrading both android devices to the new 3.1.3, I was not able to get my remote to communicate with my RC for a few days. After much pain and unwillingness to upgrade, I updated everything to the newest FW - This got me up and flying again
RC 1.8
AC 1.10.009
App 3.1.3
However, the video signal was complete garbage from what I was used to on my previous setup.
RC 1.03.0020
AC 1.06.0040
App 2.9.1
With 15-17 satellites, per usual, I was testing a waypoint route in Litchi to determine if I could use it to get better distance. I would hardly be 300ft away in an open field and it would tear and freeze so badly I had to land because the FPV was unusable. I changed from F mode to P mid air to cancel the Litchi route and regain manual control and land. After force quitting Litchi and attempting a quick change over to the DJI Go app to try a Custom channel (the Litchi selection wouldn't work), I attempt to try another flight...To my surprise I had 0 satellites in both apps (Litchi, Go) and on both Android devices! After I had landed, until now I have had 0 satellites.
I am still stuck with no GPS signal regardless of what FW version RC, AC, device, or App I have (I downgraded each with no results), which leads me to believe that I have a hardware issue. However, this all happened because I switched apps and/or flipped the switch on my RC, so I haven't ruled out software yet either.
I have logs from my updates that I can share if they will provide helpful information
Currently at:
RC 1.6
AC 1.9.6
App 2.6.1
Before I crack open my bird, my questions are:
Is GPS signal received from both the AC and RC, or just AC?
Would there be a setting or something that can shut off GPS entirely?