Motors will not start on my phantom3 standard

[Dale R. Todd]

After charging the batteries in the RC and the drone battery.I then tried to start the motors on the drone, they did nothing. They would not start. I was trying to start them to test the motors on the drone. So I didn't put the props on. I paired the Rc with the drone. I could move the camera so I knew it was paired. But try and try again, the motors would not start. I would be grateful for any and all help.

 

[alokbhargava]

Try to calibrate the sticks.


Sent from my iPhone using PhantomPilots

 

[The Springs]

Does it say you have signal on the app though I get camera feed (haven't tried moving the camera though) but the transmitter won't link to the AC therefore I can't start the motors .

 

[Deleted member 62848]

Hi u could try pressing the link button on drone again

Sent from my SM-T355Y using PhantomPilots mobile app

 

[msinger]

After charging the batteries in the RC and the drone battery.I then tried to start the motors on the drone, they did nothing. They would not start.

Is this the first time you ever tried starting the motors? If so, did you activate your Phantom in DJI GO?

 

[Dale R. Todd]

Try to calibrate the sticks.

Could you please tell me how to calibrate the sticks? I didn't find any info on that. Thank you.
Sent from my iPhone using PhantomPilots

W

 

[Dale R. Todd]

Hi u could try pressing the link button on drone again

Sent from my SM-T355Y using PhantomPilots mobile app

Ive tried that several times already Thanks

 

[RodPad]

@i[URL='http://www.phantompilots.com/members/dale-r-todd.75167/']Dale R. Todd[/URL],

Welcome to the forum!

As @msinger asked, did you activate your Phantom in DJI GO?


Rod

 

[MadDias]

Did you activate the drone? You need to kind of "register" your drone through the DJI GO app in order to be able to start it.
After you activated the drone you can start the motors by pulling both sticks down and to the center.
You can stop the the same way.

 

[mikep2323]

The only time that happened to me after registering it was when I had to calibrate the sticks.

Sent from my Shield Tablet using PhantomPilots mobile app

 

[Dale R. Todd]

Is this the first time you ever tried starting the motors? If so, did you activate your Phantom in DJI GO?

Yes, this is the first time that I've tried to start the motors.I talk to some others about this problem and they told me the same as you did. Thank you much for the input.

 

[msinger]

Were you able to resolve this issue?

 

[CrispyClaret]

Do you live in a no fly zone?