another one bites the dust. When connected to usb on 3 different pcs no version info was displayed, tried several cables, nothing. After flashing the ground unit only, there everything was fine, I get boot loop. Anybody has any similar issues?
[ 15.030000] pinmux1:0x00285555
[ 15.030000] pinmux4:0x1155fdff
[ 15.030000] davinci_enc_set_display_timing=>mode->hsync_len:62, mode->left_margin:122, mode->right_margin:16, mode->xres:720
[ 15.040000] davinci_enc_set_display_timing=>mode->vsync_len:6, mode->upper_margin:36, mode->lower_margin:9, mode->yres:480
[ 15.060000] davinci_venc davinci_venc: Desired VENC clock not available
[ 15.060000] davinci_venc davinci_venc: PLL's doesnot yield required VENC clk
[ 15.070000] PLL's doesnot yield required VENC clk
[ 15.140000] pinmux1:0x00285555
[ 15.140000] pinmux4:0x1155fdff
[ 15.140000] davinci_enc_set_display_timing=>mode->hsync_len:40, mode->left_margin:260, mode->right_margin:110, mode->xres:1280
[ 15.150000] davinci_enc_set_display_timing=>mode->vsync_len:5, mode->upper_margin:25, mode->lower_margin:5, mode->yres:720
[ 15.320000] pinmux1:0x00285555
[ 15.320000] pinmux4:0x1155fdff
[ 15.320000] davinci_enc_set_display_timing=>mode->hsync_len:62, mode->left_margin:122, mode->right_margin:16, mode->xres:720
[ 15.330000] davinci_enc_set_display_timing=>mode->vsync_len:6, mode->upper_margin:36, mode->lower_margin:9, mode->yres:480
[ 15.350000] davinci_venc davinci_venc: Desired VENC clock not available
[ 15.350000] davinci_venc davinci_venc: PLL's doesnot yield required VENC clk
[ 15.360000] PLL's doesnot yield required VENC clk
[ 15.430000] pinmux1:0x00285555
[ 15.430000] pinmux4:0x1155fdff
[ 15.430000] davinci_enc_set_display_timing=>mode->hsync_len:40, mode->left_margin:260, mode->right_margin:110, mode->xres:1280
!!!!!!!!!!!!!!!![ 15.450000] davinci_enc_set_display_timing=>mode->vsync_len:5, mode->upper_margin:25, mode->lower_margin:5, mode->yres:720
!!!!!!! open 68013 failed VENDOR_ID = 0x0547
Error: Failed to create osd attr device
umount: can't remount none read-only
umount: mdev busy - remounted read-only
umount: can't remount none read-only
The system is going down NOW!
Sent SIGTERM to all processes
here goes to reboot and just loops around.any help would be greatly appreciated