ITElite DBS Mod Not easy!!

[D4T_PoM]

I go 4km today and had full signal, I came back cuz I was just worried

Thats great.

How was the feeling, did you get cold feet?
Lol

 

[brianb87]

DBS mod done! Have yet to test it! Hopefully it works!

P.S. - Remove the con board screws for easier removal and install of the ribbon.

 

[DJi Newbie]

Im waiting for HDMI module to do both together

 

[bobmyers]

Im waiting for HDMI module to do both together

That is what I did-- worked out well

 

[III% Streve]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

The ribbon cable is easy to remove and reinstall if you take the card out first. And looking the latex is a no brainer! Cumbersome, loss of feeling, and sticky for no reason.

 

[JamesD]

The ribbon cable is easy to remove and reinstall if you take the card out first. And looking the latex is a no brainer! Cumbersome, loss of feeling, and sticky for no reason.

I feel like I'm watching a super agent spy for some reason in that video!

 

[Jbundy63]

I feel like I'm watching a super agent spy for some reason in that video!

It's the gloves [emoji1]

 

[FatTwoTonTony]

Yes some work gloves when dealing with the wonderful clients at work!!

 

[bobmyers]

Dark room, gloves, something very secret going on

 

[phantom13flyer]

A couple guys were asking about backpacks that hold a modified controller. I found this waterproof backpack on ebay for 55 dollars . I love it. It's completely customizable to carry all your gear and accessories however you want to set it up.

 

[brianb87]

A couple guys were asking about backpacks that hold a modified controller. I found this waterproof backpack on ebay for 55 dollars . I love it. It's completely customizable to carry all your gear and accessories however you want to set it up.View attachment 31427View attachment 31428

I have a hard case which I don't like. Thinking about buying a backpack. Just not sure if I want to go this route or buy a better one. Now that I have the DBS mod thinking of getting something that will fit.

 

[phantom13flyer]

I have a hard case which I don't like. Thinking about buying a backpack. Just not sure if I want to go this route or buy a better one. Now that I have the DBS mod thinking of getting something that will fit.

I was really surprised by the quality of this backpack . it is much better than I expected to be. For 55 bucks including shipping , can't beat it. Its served me very nice!

 

[brianb87]

I was really surprised by the quality of this backpack . it is much better than I expected to be. For 55 bucks including shipping , can't beat it. Its served me very nice!

I might just have to give this a try. Think my hard case causes more problems then anything.

 

[phantom13flyer]

I might just have to give this a try. Think my hard case causes more problems then anything.

I looked at the hard cases and they just seemed to bulky . I wanted something they didn't look like I was packing a bomb lol. Plus the prices just seemed to high for what they are.

 

[bobmyers]

Modified my Seahorse Case to accommodate controller with antenna-- quite serviceable-- it had the pluck foam--- so was an easy mod after installing the HDMI board and DBS antenna mod. Still plenty of padding for the Controller and P3 and I don't have to remove the antenna mod.

 

[Acbrian1]

I got my DBS antenna yesterday and it took about an hour to install. I managed to track the cables back under the original control sticks. I tested the P3P line of sight and it seemed solid however I did notice that you have to be pretty accurate for line of sight which I understood maybe the case. I'm currently also testing the extra channels to increase range and decrease wifi interference.. So far it seems good. I wanted to purchase another controller but it seems that only one controller can be pair with the drone. Never mind.

Chris

I have a modded controller with the DBS antenna and also my original unmodded RC . Only takes a minute to pair the other controller depending on which one you want to use that flight..You can pair as many as you want, just one at a time

 

[AirMan]

View attachment 31435 Modified my Seahorse Case to accommodate controller with antenna-- quite serviceable-- it had the pluck foam--- so was an easy mod after installing the HDMI board and DBS antenna mod. Still plenty of padding for the Controller and P3 and I don't have to remove the antenna mod.

Can you post a picture of your remote control mod with the Wi-Fi boosters. I am trying to do the same thing just can't mount them good. Thanks

 

[Mike Mauk]

ok I just got my dbs mod done by Chuck and now it says my RC needs a firmware update on the controller... dang, so will the newest firmware update it I wasnt expecting to need to do this all over again.

 

[Mike Mauk]

ok I just got my dbs mod done by Chuck and now it says my RC needs a firmware update on the controller... dang, so will the newest firmware update it I wasnt expecting to need to do this all over again.

ok well this is the first time I have done the RC firmware update since the new update and it does it on the APP that is so nice. I did need to go back and do the channel hack but that is not much of a problem.http://www.rcgroups.com/forums/showpost.php?p=32346917&postcount=30331 Now I wish the batteries would do the same. Any way am getting prepared to fly for the first time after the dbs mod! it looks ready after I charge the RC

 

[Bluethundr]

Go figure. I just did my i1 remote. I was planing on doing my P3A remote, but when I get my slave remote for the i1, I am just going to bind that to the P3A and go dual purpose. I WANTED the SMA in the antenna holes. It took some extra time and a small dremel, but got it done.