tgreenstone said:Depending on your transmitter, They make Plug-n-play connectors. I have the ImmersionRC TX and i just installed that with the mini iosd. This is the cable i used
http://www.amazon.com/gp/product/B00NRC ... UTF8&psc=1
OI Photography said:Since you're using the GCU with the gimbal instead of the upgrade board, you'll need to connect the video output leads from that (looks like a headphone jack) to those matching inputs on the iOSD mini.
Unfortunately those plug-in-play cables and that diagram only apply if you're using the P1 upgrade board.
OI Photography said:Since you're using the GCU with the gimbal instead of the upgrade board, you'll need to connect the video output leads from that (looks like a headphone jack) to those matching inputs on the iOSD mini.
Unfortunately those plug-in-play cables and that diagram only apply if you're using the P1 upgrade board.
tgreenstone said:These are to two pictures i have that i took when completed. I will able to get better shots later tonight when i get back home.
I moved the cam-bus connector inside. and have the wires come through a hole near the legs. One line into mini iosd, next to board, final 2 into the immersionrc tx
dl2727 said:OI Photography said:Since you're using the GCU with the gimbal instead of the upgrade board, you'll need to connect the video output leads from that (looks like a headphone jack) to those matching inputs on the iOSD mini.
Unfortunately those plug-in-play cables and that diagram only apply if you're using the P1 upgrade board.
Any idea where I can get a cable like that?