Can you briefly touch on which parameter preferences specifically you check before every flight? And what you're looking for? I'm set to do some flying this evening, but am going to do a quick IMU calibration beforehand.
Thanks for your response.
When doing an IMU calibration, I like to chill my drone down in the frost-free fridge for 15-20 minutes first. Or outside if it's cool enough.
When the drone is cold, & just before you bring it out, have the Go app ready on the IMU calibration page, so when you replace the room temp., warm battery into the drone and turn it on, as soon as the camera stops moving, tap the IMU calibration tab.
I always recalibrate the gimbal directly after this. A chilled IMU calibration has helped several here correct a crooked horizon, all but alleviates that warm up period when you first turn the drone on, and a couple other issues not coming to mind, as I never experienced any of the negative circumstances other pilots had.
When you go through the camera settings, this is a great place to begin personalizing the parameters...
Sure I can go through my own personal preferences, but perhaps a couple instructional videos would be better?
I will share mine first.
Under my Camera
I use HDR or AEB "3"
Image Size 16:9
Image Format JPEG+ RAW
White Balance Custom 5200K (depending on ambient light)
Style None or Custom
Color D-Log
Auto or Manual, ISO and Shutter. Just depending...
For my Video
4K 4096x2160
Video Format MOV or MP4 if you decide ;-)
NTSC
White Balance Custom 6000K
Style None
Color D-Log
Histogram On
Video Caption Off
Over Exposure Warning On
Grid None
Center Point Circle
Anti-Flicker 60Hz for N.America
File Index Continuous
Aircraft Battery
Show Voltage on Main Screen On
Time to Discharge 10 days
Main Controller Settings
MFM On
Return-to-Home Altitude 75M
Beginner Mode Off
Set Max Flight Altitude 500M
Enable Max Distance Off
Remote Controler Signal Lost Return To Home
Smart Return To Home On
Enable Vision Positioning On
Turn on Front LEDs On
Advanced Settings here is the fun place to seek adventure...
Sensors, here we look at MOD values.
Right now sitting here, my values are such:
Gyroscope Mod 0.01
Acceleration 1.00
Compass should be in & around 1400.00~1500.00
Check IMU Calibration not required
Hopefully these are some of the things we all can look at? ;-)
As well, keep your flight battery packs charged before flights.
And kind Sir, Always and all-ways, be pleasant to others when they step out of the bushes invariably to ask us "interesting" drone specific questions...
Have fun, fly safe, happy landing...
& Ahhhhh, big exhale... Ha
Now "I" need to recharge.
RedHotPoker