I made this setup up on the cheap...It was Made to Beat my Stock P3P "P3PKiller ":)

Joined
Oct 23, 2016
Messages
209
Reaction score
44
Age
52
It is a Highly modded Phantom 3 Standard I call this my P3Pkiller!!
Everything But the ArgTek can be bought for less than $100
Happy Flying everyone!! #BoostedP3S
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 

Attachments

  • 20161018_120704.jpg
    20161018_120704.jpg
    2 MB · Views: 755
  • 20160830_164932.jpg
    20160830_164932.jpg
    967.3 KB · Views: 682
  • 20160927_220522.jpg
    20160927_220522.jpg
    865.5 KB · Views: 724
  • 20161018_120629.jpg
    20161018_120629.jpg
    2 MB · Views: 747
  • 20160927_220601.jpg
    20160927_220601.jpg
    779.8 KB · Views: 719
  • 20161029_200523.jpg
    20161029_200523.jpg
    839.8 KB · Views: 695
  • 20161029_200510.jpg
    20161029_200510.jpg
    1,007.8 KB · Views: 793
  • 20161018_120629.jpg
    20161018_120629.jpg
    2 MB · Views: 737
  • 20161029_200510.jpg
    20161029_200510.jpg
    1,007.8 KB · Views: 741
  • 20161029_200523.jpg
    20161029_200523.jpg
    839.8 KB · Views: 770
  • 20161018_120704.jpg
    20161018_120704.jpg
    2 MB · Views: 697
Last edited:
  • Like
Reactions: PapaTita
Holly S**t, that looks like some kind of weapon lol,

Would love you to post a quick post of the run down of what you have done, how you did it etc.

Darren
 
Ken ... can I ask why you need 5S on a setup that a 3S - 4S is indicated (the 5.8Ghz unit) ... The voltage input is stated as 12 - 15V as I see in the pictures.
What I find interesting is the seller does not restrict the antenna as I see on most to 7dbi ...

The 2.4Ghz is same unit as I have coming ... auto switching Tx / Rx on 2W ... and up to 5.5V

My plan is to have :

2.4G Extend Range Signal Booster Amplifier Device For DJI Phantom Vision FPV NEW | eBay

Mini 5.8G Signal Booster amp for DJI Phantom RC Quadcopters Flight Models HOT JS | eBay

Life 2S battery with 2.4 unit fed by Sbec and 5.8 unit direct. I also have plenty spare 3S LiPo's that are at end of life for high demand flight use that can be used without problem. I am hoping that I can slot the LiXX inside the RC case.

I have a 14dbi panel 5.8 antenna coming but I have been warned about its use with the 5.8 booster.

Will be interesting once I get all fitted out and see what difference I have to yours ... reasonably similar kit .... and of course with Argtec antenna setup.

Nigel
 
  • Like
Reactions: KennethMcNutt
Ken ... can I ask why you need 5S on a setup that a 3S - 4S is indicated (the 5.8Ghz unit) ... The voltage input is stated as 12 - 15V as I see in the pictures.
What I find interesting is the seller does not restrict the antenna as I see on most to 7dbi ...

The 2.4Ghz is same unit as I have coming ... auto switching Tx / Rx on 2W ... and up to 5.5V

My plan is to have :

2.4G Extend Range Signal Booster Amplifier Device For DJI Phantom Vision FPV NEW | eBay

Mini 5.8G Signal Booster amp for DJI Phantom RC Quadcopters Flight Models HOT JS | eBay

Life 2S battery with 2.4 unit fed by Sbec and 5.8 unit direct. I also have plenty spare 3S LiPo's that are at end of life for high demand flight use that can be used without problem. I am hoping that I can slot the LiXX inside the RC case.

I have a 14dbi panel 5.8 antenna coming but I have been warned about its use with the 5.8 booster.

Will be interesting once I get all fitted out and see what difference I have to yours ... reasonably similar kit .... and of course with Argtec antenna setup.

Nigel
Say what now ha ha lol
 
Life's for living !!

I'm sure Ken will update on all findings and results ... as I will ....

Nigel
 
  • Like
Reactions: KennethMcNutt
This is the next step.. Birdside Mod!!
FPV Transmitter RF Signal Amplifier Booster for DJI Phantom Airplane Models WT | eBay
SMA Male Plug Center Straight to IPX U.FL Female Pigtail Jumper 1.13 Cable 20cm | eBay
Ken ... can I ask why you need 5S on a setup that a 3S - 4S is indicated (the 5.8Ghz unit) ... The voltage input is stated as 12 - 15V as I see in the pictures.
What I find interesting is the seller does not restrict the antenna as I see on most to 7dbi ...

The 2.4Ghz is same unit as I have coming ... auto switching Tx / Rx on 2W ... and up to 5.5V

My plan is to have :

2.4G Extend Range Signal Booster Amplifier Device For DJI Phantom Vision FPV NEW | eBay

Mini 5.8G Signal Booster amp for DJI Phantom RC Quadcopters Flight Models HOT JS | eBay

Life 2S battery with 2.4 unit fed by Sbec and 5.8 unit direct. I also have plenty spare 3S LiPo's that are at end of life for high demand flight use that can be used without problem. I am hoping that I can slot the LiXX inside the RC case.

I have a 14dbi panel 5.8 antenna coming but I have been warned about its use with the 5.8 booster.

Will be interesting once I get all fitted out and see what difference I have to yours ... reasonably similar kit .... and of course with Argtec antenna setup.

Nigel[/QUOTE

The 5S battery... Well it was just that is was concerned about battery life.. It as Test there^^ was running 5V and 12V out from the BEC... Not knowing for sure what all Ah draw was.. I optioned for the cheapest highest Volt (5S) battery that would work, with My "Dual Output" Bec.. So I found that one.. "Short, not to fat, Cheap!" seemed to fit the bill.. The Bec was also overkill.. I did not now what I was going to end up with.. So a Mutli-Volt Dual output, Fit that bill.. It was all cheap.. But it was also designed as a test bed.. Plug and Play ;) Any antenna, any Amp, Any volt need was meet this way.. With the other 5.8 amp pictured.. (no fan) All amps are 5v then... So with a 4amp 5v bec any 2S battery would run them..
 
This is what She'll Do in the around the house.. Keep in mind there is hundreds of wifi sources below me.. I don't give up the first time ;)... But as you might be able to tell I have a RTH issue in both video's??? I had it fight to get it home?? :(
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 

Members online

Forum statistics

Threads
143,066
Messages
1,467,355
Members
104,934
Latest member
jody.paugh@fullerandsons.