sorry that should be P3A. good catch sir.
I was really looking about 2 weeks ago at a standard.I just didn't know if maybe you got a new bird [emoji41]
And you & your family have A safe one too.Happy Fourth of July everyone, check out dronesnaps having too much funhttp://www.phantompilots.com/index.php?posts/860726/
I just need some depends too......![]()
just running it stock on the most part. with wind surfs. using a Re700 with one external antenna and the internal puck antenna. on the drone just replaced the puck antenna's with the dipole. I also moved the range extender out about 1.5 inches. I found with the external antenna on the range extender it was cause problems with my r/c antenna. In the picture you can see it's out a little farther. used an Allen wrench epoxied it to the bar. you can see the end of the wrench in the picture. It did not seen to make any different by having the dipole sideways on the wifi side with the wind surfer. Oh and yes running in GPS mode until RTH kicked in.
View attachment 59238
View attachment 59239
View attachment 59240
dirtybum,It's time for battery mod for you, you got one of them good birds
You know I have that extra battery plug for the smart batteries I'm thinking putting on longer leads and solder it to main board . then Velcro a second battery under back.
I would still need to push the button to turn it on.I don't know if the data pins will be pressed that way. What do you think. If you're going to be soldering to the mainboard you're just as well off soldering XT 60 connectors
We use essential cookies to make this site work, and optional cookies to enhance your experience.