Hello,
Haven't flown my P3P for a while ( 6 months ). Charged it and decided to upgrade it with a "modified" firmware : howto:p3i1modfw [dji.retroroms.info]
Didn't want to update by itself, I had to force the update (booting the phantom with bind button pushed. Update went successfull.
I went to test it out in a field (no nearby wifi, or antenna, all wifi and Lte off) and I had a very bad video feed, even at 5 meters away the feed was cutting, showing artefacts, freezing...
On the app, I have a "strong interference" warning "weak signal" that comes and go every second. When I look at the transmission channels, they are all over the place, every update they are either at -100db or at -60db.
Tested in another place, relinked the remote, recalibrated the remote, recalibrated the compass, switched from my ipad to my android phone, even tried with different sd cards... No luck. Always the same bug.
Then I re flash-ed it with official firmware a couple of times, it didn't get better. Then I reflashed it with the modified firmware and the remote ON.. still the same issue.
From looking at the logs in /misc/logs , it doesn't look like anything was briked (i was thinking maybe the occusync got briked or failed somehow) :
// When upgrading with the modded firmware
[00017410]========== 2020.05.13 08:57:38. boot(15) ============
[00017467]Firmware [C:\PMCAPPFw3.bin] detected, card sn [0xdaf037dd].
[00017619][03 06] Firmware upgrade start...
[00381903][03 06] Firmware upgrade finished successfully.
[00381961]Done.
// Then booting with the stock firmware loaded. Does not start upgrade by itself.
[00012664]========== 2020.05.13 11:33:23. boot(15) ============
[00012719]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc5a5c323].
[00012775]Packet upgrade start...
[00012836]Packet checking...
[00012885]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012942]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00012997]Done.
[00013050]Version checking[1]...
[00013142][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013230][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013290][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013423][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013542][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013594][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013698][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013798][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013907][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014011][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014190][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014319][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014447][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014533][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014586][01 00][00] v1.32.5432 -> v1.32.5432
[00014643][01 01][00] v1.32.5432 -> v1.32.5432
[00014714][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014792][09 00][00] v4.1.0.0 -> v4.1.0.0
[00014847]Packet upgrade cancelled at version checking.
// Then forcing the stock upgrade firmware (booting with bind button pushed)
[00012613]========== remo-con disconnect. boot(15) ============
[00012667]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc5a5c323].
[00012722]Packet upgrade start...
[00012781]Packet checking...
[00012833]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012888]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013020]Done.
[00013073]Version checking[1]...
[00025627][03 06][00] device not detected.
[00038179][03 05][00] device not detected.
[00038272][04 00][00] v1.48.0.0 -> v1.48.0.0
[00050825][11 00][00] device not detected.
[00063377][11 01][00] device not detected.
[00075937][12 00][00] device not detected.
[00088488][12 01][00] device not detected.
[00101041][12 02][00] device not detected.
[00113590][12 03][00] device not detected.
[00113747][15 00][00] v1.1.2.0 -> v1.1.2.0
[00126301][17 00][00] device not detected.
[00138853][17 01][00] device not detected.
[00151418][19 00][00] device not detected.
[00151471][01 00][00] v1.32.5432 -> v1.32.5432
[00151528][01 01][00] v1.32.5432 -> v1.32.5432
[00151597][08 00][00] v0.13.0.7 -> v0.13.0.7
[00151686][09 00][00] v0.0.0.0 -> v4.1.0.0 need upgrade.
[00151741]Done.
[00153797]Waiting for user confirm...
[00163853]Timeout, start upgrade automatically.
[00163960]Firmware upgrading[1]...
[00164040][09 00] Firmware upgrade start...
[00216171][09 00] Firmware upgrade finished successfully.
[00216228]Done.
[00216284]Version checking[2]...
[00216372][03 06][00] v2.4.20.50 -> v2.4.20.50
[00216471][03 05][00] v34.2.0.9 -> v34.2.0.9
[00216534][04 00][00] v1.48.0.0 -> v1.48.0.0
[00216673][11 00][00] v1.8.0.0 -> v1.8.0.0
[00216812][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00216867][11 01][00] v1.8.0.0 -> v2.0.0.33
[00216980][12 00][00] v1.12.0.0 -> v1.12.0.0
[00217111][12 01][00] v1.12.0.0 -> v1.12.0.0
[00217220][12 02][00] v1.12.0.0 -> v1.12.0.0
[00217320][12 03][00] v1.12.0.0 -> v1.12.0.0
[00217487][15 00][00] v1.1.2.0 -> v1.1.2.0
[00217581][17 00][00] v1.1.1.7 -> v1.1.1.7
[00217740][17 01][00] v1.0.2.7 -> v1.0.2.7
[00217812][19 00][00] v1.0.8.96 -> v1.0.8.96
[00217868][01 00][00] v1.32.5432 -> v1.32.5432
[00217926][01 01][00] v1.32.5432 -> v1.32.5432
[00217998][08 00][00] v0.13.0.7 -> v0.13.0.7
[00218093][09 00][05] v4.1.0.0 -> v4.1.0.0
[00218240]Packet upgrade finish successfully.
I did a research with keywords like Interference but couldn't really find anything interesting for me. Hope someone here can help.
I live in Europe if that can help identify the problem. Found an interesting video from a swiss german electronician who flashes the occusync firmware via TTL here, but I'm affraid it doesn't apply to me since my occusync firmware appears OK from the log [15 00][00] v1.1.2.0 -> v1.1.2.0 . Hope we can find an easier solution too ;-)
best regards,
Haven't flown my P3P for a while ( 6 months ). Charged it and decided to upgrade it with a "modified" firmware : howto:p3i1modfw [dji.retroroms.info]
Didn't want to update by itself, I had to force the update (booting the phantom with bind button pushed. Update went successfull.
I went to test it out in a field (no nearby wifi, or antenna, all wifi and Lte off) and I had a very bad video feed, even at 5 meters away the feed was cutting, showing artefacts, freezing...
On the app, I have a "strong interference" warning "weak signal" that comes and go every second. When I look at the transmission channels, they are all over the place, every update they are either at -100db or at -60db.
Tested in another place, relinked the remote, recalibrated the remote, recalibrated the compass, switched from my ipad to my android phone, even tried with different sd cards... No luck. Always the same bug.
Then I re flash-ed it with official firmware a couple of times, it didn't get better. Then I reflashed it with the modified firmware and the remote ON.. still the same issue.
From looking at the logs in /misc/logs , it doesn't look like anything was briked (i was thinking maybe the occusync got briked or failed somehow) :
// When upgrading with the modded firmware
[00017410]========== 2020.05.13 08:57:38. boot(15) ============
[00017467]Firmware [C:\PMCAPPFw3.bin] detected, card sn [0xdaf037dd].
[00017619][03 06] Firmware upgrade start...
[00381903][03 06] Firmware upgrade finished successfully.
[00381961]Done.
// Then booting with the stock firmware loaded. Does not start upgrade by itself.
[00012664]========== 2020.05.13 11:33:23. boot(15) ============
[00012719]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc5a5c323].
[00012775]Packet upgrade start...
[00012836]Packet checking...
[00012885]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012942]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00012997]Done.
[00013050]Version checking[1]...
[00013142][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013230][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013290][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013423][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013542][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013594][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013698][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013798][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013907][12 02][00] v1.12.0.0 -> v1.12.0.0
[00014011][12 03][00] v1.12.0.0 -> v1.12.0.0
[00014190][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014319][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014447][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014533][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014586][01 00][00] v1.32.5432 -> v1.32.5432
[00014643][01 01][00] v1.32.5432 -> v1.32.5432
[00014714][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014792][09 00][00] v4.1.0.0 -> v4.1.0.0
[00014847]Packet upgrade cancelled at version checking.
// Then forcing the stock upgrade firmware (booting with bind button pushed)
[00012613]========== remo-con disconnect. boot(15) ============
[00012667]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xc5a5c323].
[00012722]Packet upgrade start...
[00012781]Packet checking...
[00012833]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012888]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013020]Done.
[00013073]Version checking[1]...
[00025627][03 06][00] device not detected.
[00038179][03 05][00] device not detected.
[00038272][04 00][00] v1.48.0.0 -> v1.48.0.0
[00050825][11 00][00] device not detected.
[00063377][11 01][00] device not detected.
[00075937][12 00][00] device not detected.
[00088488][12 01][00] device not detected.
[00101041][12 02][00] device not detected.
[00113590][12 03][00] device not detected.
[00113747][15 00][00] v1.1.2.0 -> v1.1.2.0
[00126301][17 00][00] device not detected.
[00138853][17 01][00] device not detected.
[00151418][19 00][00] device not detected.
[00151471][01 00][00] v1.32.5432 -> v1.32.5432
[00151528][01 01][00] v1.32.5432 -> v1.32.5432
[00151597][08 00][00] v0.13.0.7 -> v0.13.0.7
[00151686][09 00][00] v0.0.0.0 -> v4.1.0.0 need upgrade.
[00151741]Done.
[00153797]Waiting for user confirm...
[00163853]Timeout, start upgrade automatically.
[00163960]Firmware upgrading[1]...
[00164040][09 00] Firmware upgrade start...
[00216171][09 00] Firmware upgrade finished successfully.
[00216228]Done.
[00216284]Version checking[2]...
[00216372][03 06][00] v2.4.20.50 -> v2.4.20.50
[00216471][03 05][00] v34.2.0.9 -> v34.2.0.9
[00216534][04 00][00] v1.48.0.0 -> v1.48.0.0
[00216673][11 00][00] v1.8.0.0 -> v1.8.0.0
[00216812][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00216867][11 01][00] v1.8.0.0 -> v2.0.0.33
[00216980][12 00][00] v1.12.0.0 -> v1.12.0.0
[00217111][12 01][00] v1.12.0.0 -> v1.12.0.0
[00217220][12 02][00] v1.12.0.0 -> v1.12.0.0
[00217320][12 03][00] v1.12.0.0 -> v1.12.0.0
[00217487][15 00][00] v1.1.2.0 -> v1.1.2.0
[00217581][17 00][00] v1.1.1.7 -> v1.1.1.7
[00217740][17 01][00] v1.0.2.7 -> v1.0.2.7
[00217812][19 00][00] v1.0.8.96 -> v1.0.8.96
[00217868][01 00][00] v1.32.5432 -> v1.32.5432
[00217926][01 01][00] v1.32.5432 -> v1.32.5432
[00217998][08 00][00] v0.13.0.7 -> v0.13.0.7
[00218093][09 00][05] v4.1.0.0 -> v4.1.0.0
[00218240]Packet upgrade finish successfully.
I did a research with keywords like Interference but couldn't really find anything interesting for me. Hope someone here can help.
I live in Europe if that can help identify the problem. Found an interesting video from a swiss german electronician who flashes the occusync firmware via TTL here, but I'm affraid it doesn't apply to me since my occusync firmware appears OK from the log [15 00][00] v1.1.2.0 -> v1.1.2.0 . Hope we can find an easier solution too ;-)
best regards,
Last edited: