- Joined
- Aug 22, 2014
- Messages
- 6
- Reaction score
- 0
Hi All,
I have a DJI Phantom 2, the new H3-3D gimbal and a Boscam TS 353 Transmitter.
I installed everything as it should be, but I can't get a working picture on my monitor. Just static. Gimbal works though.
Cables should be good, just to be sure I'll summarize every cable connected on the drone:
- 8pin from gimbal to interference board to the drone
- red (transmitter) to red drone
- black (transmitter) to brown drone
- yellow (transmitter) to yellow drone
- another black (transmitter) to brown drone
The red light on the transmitter emits, so there must be power there. What else might be wrong?
Thanks,
Mx
I have a DJI Phantom 2, the new H3-3D gimbal and a Boscam TS 353 Transmitter.
I installed everything as it should be, but I can't get a working picture on my monitor. Just static. Gimbal works though.
Cables should be good, just to be sure I'll summarize every cable connected on the drone:
- 8pin from gimbal to interference board to the drone
- red (transmitter) to red drone
- black (transmitter) to brown drone
- yellow (transmitter) to yellow drone
- another black (transmitter) to brown drone
The red light on the transmitter emits, so there must be power there. What else might be wrong?
Thanks,
Mx