Stabilizer Rig for Phantom 3 Adv/Pro

[naxtito]

Hi,

I want share with us my new tutorial, and footage test of this DIY PVC pipes Stabilizer rig for Phantom 3 Adv/Pro.
If you have any questions feel free to ask.

 

[Trinimon]

Pretty smart camera cage you built. Nice job.

 

[NRJ]

Nice and thanks for listing the parts. You can get some really nice and different shots like that.

 

[Quadcopterpilot]

I'd be concerned that's it's putting stress on the motors/bolts but very cool idea.


Sent from my iPad using PhantomPilots

 

[fastfed]

I'd be concerned that's it's putting stress on the motors/bolts but very cool idea.


Sent from my iPad using PhantomPilots

no way, its the same pressure as a prop would give, only its 100% even at almost all times unlike when in the air.

kind of like picking up a plane by the wings

It's designed to be held in that location. Obviously you don't want to whip it around and be rough with it.

 

[Oso]

Nice job @naxtito

 

[Neon Euc]

Really nice set up

Sent from my Power using PhantomPilots mobile app

 

[naxtito]

The pressure up for each motor in flight are about 500g - 800g, all rig support a weight less than 1.3kg, this is 350g each motor. (the controller weight are not supported by motors, only Phantom 3 weight)

Somebody knows the american size for european 25mm pipe?, i would like put it on description but i don´t know how is.

Thanks to all for the comments, any questions are welcome.