Phantom 3se Gimbal Help Please

[MAD2]

Hallo all
I bought a secondhand unit that were in a crash
Everything is working fine, except if i start the quadcopter
i must press the gimbal lightly down about 45%
before the controller button works.
That is now the scroll wheel for tilting the gimbal up and down.
Thanx for the help in advance.

 

[Nightwolf]

look to see if anything is obstructing the gimbal, like the ribbon cable maybe

 

[MAD2]

Nightwolf thanx i just found out there is another way to get it working. I have to calibrate the gimbal every time before i fly.

 

[Nightwolf]

I had to nudge mine every time i started up, turned out the flat cable had come unstuck and was hindering full movement. Make sure the motors move freely in all directions with the power off and moving by hand

 

[MAD2]

Thanks Nightwolf