Phantom 3 Standard range mod , let's do it together...
- Thread starter Ojcze Nasz
- Start date
- Joined
- Jul 13, 2016
- Messages
- 376
- Reaction score
- 262
If you are in CE mode, you can use the windows application DIUpdate.exe, faster and safer than manually update to file system on remote/drone.
- Joined
- Jun 11, 2016
- Messages
- 12
- Reaction score
- 0
- Age
- 46
Sorry ı am beginner user. What is mean Ce mode or how will ı understand my phantom 3 standart in Ce mode?
Sent from my E6603 using PhantomPilots mobile app
If you are flying within Europe, the CE rules apply which means 17 db signal strength.
If you are flying in the USA, the FCC rules apply which means 27 db signal strength.
With PapaTita software you can force 27 db signal strength within Europe (CE).
Hello to all and congratulations for the thread 
I have just made a new topic because i hope that someone can help me tu understand if is possible also to increase the video quality.
The topic is here: How increase P3 STANDARD video quality (Mbps)?
Thank you all!
I have just made a new topic because i hope that someone can help me tu understand if is possible also to increase the video quality.
The topic is here: How increase P3 STANDARD video quality (Mbps)?
Thank you all!
Before patch i made 1,5 km and lose video
I made the patch last one first option
And at the begining was ok... But at 1km i lose connection... And just before home the video came again...
Was very difficult to connect again the video... Before was much fast to reconnect..
Papatita the only files your app use and or disturb are djiled and watchlog?
Enviado do meu LG-V500 através de Tapatalk
I made the patch last one first option
And at the begining was ok... But at 1km i lose connection... And just before home the video came again...
Was very difficult to connect again the video... Before was much fast to reconnect..
Papatita the only files your app use and or disturb are djiled and watchlog?
Enviado do meu LG-V500 através de Tapatalk
that same case with me ftomas,
i'm also experience video break out then freeze and just before home the video came again but laggier and freeze alot
Hi, i used DIUpdate.exe while on 1.6.8, now i donwgraded to 1.5.7 do i have run DIUpdate.exe again after downgrading?
I did the same and it did appear to stick around. Just run the report section of the App when connected as see if it still says 27dBm.
- Joined
- Jul 21, 2016
- Messages
- 45
- Reaction score
- 7
- Age
- 50
On the official DJI's website, P3 Standard, Advance, and Professional, CE mode is 16dbm and FCC is 20dbm.
If you force the EIRP to 27dbm you have to consider for re-match your antenna using SWR meter. If not, you will burn your tx module soon. Maybe not at current flight, but soon it will be.
16 dbm = 40 mW (CE)
20 dbm = 100 mW (FCC)
27 dbm = 501.2 mW (1/2 Watt!!)
The heat produced by internal tx modul will effect with many different behaviour to your unit. Could be strightly burn the tx modul, or might be started with slightly by damaging other moduls besides; like disconnected WiFi, decreased tx quality, slowly reduced video quality, etc.
If you all insist using 27 dbm with no re-matching antenna, then I hope everything will be okay for long lasting. At least, always set the home point before long range flight with 27 dbm.
If you force the EIRP to 27dbm you have to consider for re-match your antenna using SWR meter. If not, you will burn your tx module soon. Maybe not at current flight, but soon it will be.
16 dbm = 40 mW (CE)
20 dbm = 100 mW (FCC)
27 dbm = 501.2 mW (1/2 Watt!!)
The heat produced by internal tx modul will effect with many different behaviour to your unit. Could be strightly burn the tx modul, or might be started with slightly by damaging other moduls besides; like disconnected WiFi, decreased tx quality, slowly reduced video quality, etc.
If you all insist using 27 dbm with no re-matching antenna, then I hope everything will be okay for long lasting. At least, always set the home point before long range flight with 27 dbm.
Last edited:
- Joined
- Jul 8, 2016
- Messages
- 68
- Reaction score
- 18
i agree with you mas Arya, like people yealling in very close talking :Lol
that's why I choose 24dBm, the default before the CE / FCC triger is 24dBm, I think it is quite enough and safe
so what you suggest antenna dBi for 27dBm ?
9dBi sufficient ?
that's why I choose 24dBm, the default before the CE / FCC triger is 24dBm, I think it is quite enough and safe
so what you suggest antenna dBi for 27dBm ?
9dBi sufficient ?
Last edited:
- Joined
- Jun 2, 2016
- Messages
- 226
- Reaction score
- 160
- Joined
- Jul 21, 2016
- Messages
- 45
- Reaction score
- 7
- Age
- 50
Hi,
It's okay. Critics made us go further for new invention. Here a link about antenna requirement
RF links: how far and how fast -www.afar.net
Sent from my iPhone using PhantomPilots
It's okay. Critics made us go further for new invention. Here a link about antenna requirement
RF links: how far and how fast -www.afar.net
Sent from my iPhone using PhantomPilots
