Phantom 2 vision + V3

[zinko]

Hey

I bought DJ Phantom 2 Vision + with whom I have a problem because it does not connect to wifi .
I turn on the range extender and command , then the Phantom . I find the network on the phone phantom xxxx and connect . I go into the app and choose the Generals binding , and scan the code on phantomu . The BIND and this should be it. Then is switched off all together and I turn back . Under wifi Phantom seldom found, found as before this amplifier ( requires a password and write password and which connects the link is not ) He says Unable to connect to phantom .

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

PLEAS HELP

 

[crash1sttime]

The FC 200 is the camera, you need to connect the wifi to Phantom_6227 as you did in the first step.
See this video

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Sent from my iPhone using PhantomPilots mobile app

 

[zinko]

Hello !

But after binding disappears Network phantom ! And the only fc200 is there .

 

[bernek]

How can you identify you P2V model version exactly ?

 

[zinko]

I now try to manually insert the IP adress amplifier .
I set static, by IP subnet mask , router , DNS .
Behold , the phone connects to wifi .
Everything works ok . But now he has emerged another problem . Link works for a few seconds , and then write a phantom connection broken . Then for a few seconds he connects back again write a phantom connection broken

 

[zinko]

Hello !

I found that I connect directly to the Phantom .
So I can turn off the amplifier , and is still part of the video .
It is normal that the connection is l dropping in few-ten seconds intervals ?
Or should stay connected ?

I would like to discover where the mistake is .
Now if it is normal that a direct connection is interrupted. Then an error in the amplifier .

Im asking for help

 

[Mark The Droner]

Can you post a video of what you mean?

Since this is a new problem, you might post in the correct forum that applies to P2V+ aircraft.

Phantom 2 Vision + Help