- Joined
- Jan 30, 2016
- Messages
- 9
- Reaction score
- 0
- Age
- 38
Hello! I have recently bought a gimbal for my Phantom 1 (FC40 without camera). The gimbal works fine after connecting to power, but i can't manage to find out how to make the controller tilt the camera.
The controller works fine, both the sliders and the wheel to tilt the camera are moving. Also after calibration in Nazam. I also have tested the F1 and F2 ports, which have a small current who increase/decrease when i turn the wheel.. But still, no movement on the gimbal..
The manual was a A4-page in chinese, so not much help there either. It says Arris on the gimbal, but have not found anything useful on the web for this..
The controller works fine, both the sliders and the wheel to tilt the camera are moving. Also after calibration in Nazam. I also have tested the F1 and F2 ports, which have a small current who increase/decrease when i turn the wheel.. But still, no movement on the gimbal..
The manual was a A4-page in chinese, so not much help there either. It says Arris on the gimbal, but have not found anything useful on the web for this..