P3 standard, New Firmware 1.3.5

[Ken Hanks]

Just received this update on DJI GO

 

[LuvMyTJ]

Didn't that release December 22, 2015?
EDIT: yeah it did - http://dl.djicdn.com/downloads/phantom_3_standard/en/Phantom_3_Standard_Release_Notes_en_12.24.pdf
Works fine. What firmware are you on now?

 

[Klnyc]

1.6 now. I'm still at 1.3.5, too much stories with 1.5 to 1.6[emoji24]

 

[Ken Hanks]

Didn't that release December 22, 2015?
EDIT: yeah it did - http://dl.djicdn.com/downloads/phantom_3_standard/en/Phantom_3_Standard_Release_Notes_en_12.24.pdf
Works fine. What firmware are you on now?

Wonder why the DJI GO app is just now showing? Doesn't apply to me as I have P3A running 1.6

 

[Quinten]

I just received my drone and updated to 1.3.5. It gave me a little scare with the rc not wanting to link back up but it's fixed

 

[dirtybum]

I just received my drone and updated to 1.3.5. It gave me a little scare with the rc not wanting to link back up but it's fixed

I just received my drone and updated to 1.3.5. It gave me a little scare with the rc not wanting to link back up but it's fixed

 

[dirtybum]

How'd you fix it ? I cant get my controller to bind w/ a/c

 

[Aaron407]

The manual gives the specifics on how to re-link the controller. I had the same issue, but everything worked fine after re-linking the controller.

 

[dirtybum]

Nope relinking isnt working! Back to the drawing board. Thanks.
P.s. Obviously i consulted the manuel before asking for tricks

 

[Aaron407]

I know I was a bit confused about what it meant by "pulsating beep sound" as there was one type to start with, but it changed after the linking actually started. It's tough to explain, but it might be worth giving it another few tries. I think it took me three tries before I got it to re-link properly. Good luck!