Ive recently crashed my p3 standard, aftrr crashing i had to replace the yaw arm on thr camera, the ribbon cable and also 2 motors. Unfortunantley the 2 motors i have replaced are not working either. I replaced both motors on one side of the p3 and when i turn it on it does nothing on that side. I swapped the good motor over the that side that wasnt working and it worked fine so i guessed no mother board damaged on that side put the bad motor on the good side and nothing. Hooked the new motor on the good side that was origanlly working after the crash and it doesnt work either. Can some one help amd give me some insight of what may be going on