I have a P3P, since buying I have updated all FW and done a compass calibration
I always check the IMU values before take off (along with battery temp/voltage etc)
I take off from my case which would not totally be level (it is on grass) the values I consistently get are
Gyro Mod = 0.01
Acceleration Mod = 1.00
Compass Range 1400-1550
Should I be concerned at a 0.01 variance on the Gyro ? I have read and most people say 0 so my question is how much difference does this value make.
All flights I have taken I have never noticed any issues with the exception of >20MPH gusts of wind where it may move slightly when at a 5-10m altitude as it is fighting against the wind which I assume is normal). This seems to be less apparent at 30-60m in the air or is harder to notice.
I always check the IMU values before take off (along with battery temp/voltage etc)
I take off from my case which would not totally be level (it is on grass) the values I consistently get are
Gyro Mod = 0.01
Acceleration Mod = 1.00
Compass Range 1400-1550
Should I be concerned at a 0.01 variance on the Gyro ? I have read and most people say 0 so my question is how much difference does this value make.
All flights I have taken I have never noticed any issues with the exception of >20MPH gusts of wind where it may move slightly when at a 5-10m altitude as it is fighting against the wind which I assume is normal). This seems to be less apparent at 30-60m in the air or is harder to notice.
