Flashing Red and Yellow After Changing Shell

Joined
Jul 11, 2018
Messages
11
Reaction score
0
Age
25
Hi After i Change the Shell of my Phantom 2 it flashes Red and Yellow lights, I check in to Software Assistant and get error 27, I try to Advance IMU but still get the yellow and red flashing, I try to Compass Calibrate but every time i do the Compass Calibration it flashes red rapidly, it cannot always complete the Compass Calibration it flashes red rapidly then yellow and red flashes, but i can start the motors.
 

dirkclod

Moderator
Staff Member
Premium Pilot
Joined
May 9, 2014
Messages
14,203
Reaction score
7,758
Age
64
Location
Amory Mississippi
Not sure on the colors but have changed shell's several times with my P2V's and the compass puck cable wasn't in good and caused me an issue till I cracked it back open and saw it.
Just throwing rocks here .
 
Joined
Sep 6, 2018
Messages
1,136
Reaction score
635
Age
52
Location
Canada
Rapid red means critical battery level. Not sure what the alternating red yellow mean. I have a P2V+ and with serious issues but ive never seen that combo
 
Joined
Oct 12, 2014
Messages
5,115
Reaction score
566
Location
Commerce Twp,MI
Hi After i Change the Shell of my Phantom 2 it flashes Red and Yellow lights, I check in to Software Assistant and get error 27, I try to Advance IMU but still get the yellow and red flashing, I try to Compass Calibrate but every time i do the Compass Calibration it flashes red rapidly, it cannot always complete the Compass Calibration it flashes red rapidly then yellow and red flashes, but i can start the motors.
More than likely you may have some cables in the wrong place on the control module. Open the shell and take a good photo of both the front and back of the control module. If you're using a cell phone to take those photos to be sure to take them in the horizontal not the vertical.
 

New Threads

Forum statistics

Threads
134,518
Messages
1,391,587
Members
98,064
Latest member
mxdjng