What do you think happens when you turn off the remote?i thought fast flash yellow was failsafe ?
What do you think happens when you turn off the remote?i thought fast flash yellow was failsafe ?
OP says slow flashing yellow ?What do you think happens when you turn off the remote?
I installed the new 4mm patch antennae and tested with the top shell off. Had 6 satellites. I was unable to calibrate the compass so I followed the instructions for de gaussing the compass and resolved that issue. Now I see no satellites and the DJI app says Ok to fly but no gps. The lights are slow flashing yellow. The motors will not start. I'm now suspecting the gps unit itself. Is there a way to test this before I shell out the big bucks for a replacement? I have a multimeter. All help is greatly appreciated.
Just noticed that the Vision Assistant program shows all zeros for the GPS in the upgrade tab!
Ok I replaced the gps module. In assistant it shows -.-.-.- for the loader. And 6.1.1.2 for hardware ID and 6.0.1.6 for firmware. I pressed the upgrade all button and received a message all we up to date. Any ideas!does the motor spin the correct way ?
in the assistant under upgrades, what GPS version and loader have you got ?
Upon receiving my unit back from DJI, when I try to flip the S1 switch repeatedly, I don't get the green lights, just fast flashing yellow. Is there a chance I need to do something to re-connect the controller to the drone? thanks for any help on this.i thought fast flash yellow was failsafe ?