Dual Battery Mod
- Thread starter Rocket_Aus
- Start date
Couldn't wait to test the new battery so I taped on some toe warmers, yes toe warmers, to the external batteries and took it out in 20deg Fahrenheit....weird flight though, at 23% remaining and 31min into the flight the low voltage came up and started auto landing...It caught me by surprise and good thing i was only a little over 4000ft away and i was able to bring it back...After checking the voltage the DJI battery was 13.4V with a high cell of 3.39V and the low at 3.29V...the external had13.39V remaining with the high cell at 3.49V and low cell 3.35V...one thing i noticed was the toe warmer on the high cell wasn't warm like the rest and was a dud...I did mess around with the FW a little on the voltages and this may be the result of that but this isn't the first flight after i did that and it hasn't done this before......I guess we'll see what happens next time...And yes i did say toe warmers...
- Joined
- Jan 30, 2017
- Messages
- 29
- Reaction score
- 8
- Age
- 41
68% battery at 22min of fly its great ...its that the bigger pro battery on the P4?
The P4 its more efficient because the glossy finish thats all, im going to clear coat the P3 to prove it ....lol
Hey, I was only at 11 minutes of flight but I was at 23700 feet/ 4.5 miles away and still had 68% of battery left. I do have the p4p with the 5800 mah battery but I did the external battery mod and added a split 5200 lihv battery. I think the p3 can go further than the p4 though if it had the mod.
Last edited:
Ripper!!I didn't have any luck in the classifieds here but i did win this today.. now to buy a battery to mod it with.
Hey anyone know where I can find a set of carbon fiber battery wings for my P3S? I can't find these things anywhere?!
I want to try 6.6, 8.0 and 10.0 ^^ but i hard to get Lihv ones ㅠ.ㅠ
yes! i wish i were at home .. take a screw driver on the side under the tab on each side, then use a mallet (or hammer) and pop the end off. Prochargd97 showed me this method, I'll see if i can find a video. its super easy. From there, you will need to break apart the shell with brute force, or get out a dremmel and cut it. Be careful not to cut into one of the cells. Thats a heck of a deal man, that smart board is totally worth that!
its nice to see ya around here LeeSK! Here's to seeing you posting some distance flights man, i recall a few months ago you were pushing it hard and getting some great flights!!
If you can find that video please post it but seen some users opening the P2 batt's which look similar until you need to crack open the shell.
That battery auction was a ripper deal, was watching 2 bidders outbid each other all week by $1 or $2 then i snipped them at the end.
Been a good eBay week, scored a phantom 3 adv today which is pretty much as new condition for $400US
alright, credit to prochargd97 for this technique, I think he sent me a vid originally but i coudn't find it, so i made one real quick. basically take two small flathead screwdrivers, one each under the big tabs on the sides of the battery, hold and smack the end with something hard/heavy and it will pop off.
Just got an email from HobbyKing and noticed battery bargains up to 90% off on some stuff.
Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking
Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking
- Joined
- Feb 24, 2017
- Messages
- 159
- Reaction score
- 48
- Age
- 42
^^^^ Good to hear, that's the set up I'll be trying next week!
Then I'll inch my way up to longer flights.
Then I'll inch my way up to longer flights.
Similar threads
