68% battery at 22min of fly its great ...its that the bigger pro battery on the P4?
The P4 its more efficient because the glossy finish thats all , im going to clear coat the P3 to prove it ....lol
Ripper!!I didn't have any luck in the classifieds here but i did win this today.. now to buy a battery to mod it with.
Yes! I agree with you^^I'm new to doing a battery mod, but from my reading the 5200 seems to be the most common. And the 6600 or 8000 as a max, but 10000 that's too much. Personal I went small with a 3400, which I know is on the low end, buts that's all I need.
Thanks a lot for your kind advice ^^My longest (with camera) was with the 6600. Before the new record dirtybum set (with the 10.0), i think he was pushing the 5.2. I think the 5.2 or 6600 Multistar are still the best two for with camera.
I want to try 6.6, 8.0 and 10.0 ^^ but i hard to get Lihv ones ㅠ.ㅠDepends on your goals Lee.
Taking pictures and joy flying = 5.2 & 4.0
Record distance runs = 6.6 & 8.0
Pushing your luck and possibly dropping your bird outta the sky = 10.0[emoji41]
Sent from my iPhone using PhantomPilots
yes! i wish i were at home .. take a screw driver on the side under the tab on each side, then use a mallet (or hammer) and pop the end off. Prochargd97 showed me this method, I'll see if i can find a video. its super easy. From there, you will need to break apart the shell with brute force, or get out a dremmel and cut it. Be careful not to cut into one of the cells. Thats a heck of a deal man, that smart board is totally worth that!
its nice to see ya around here LeeSK! Here's to seeing you posting some distance flights man, i recall a few months ago you were pushing it hard and getting some great flights!!Thanks a lot for your kind advice ^^
yes! i wish i were at home .. take a screw driver on the side under the tab on each side, then use a mallet (or hammer) and pop the end off. Prochargd97 showed me this method, I'll see if i can find a video. its super easy. From there, you will need to break apart the shell with brute force, or get out a dremmel and cut it. Be careful not to cut into one of the cells. Thats a heck of a deal man, that smart board is totally worth that!