DJI Phantom 3 Pro crash log Critical low voltage, battery problem?

Joined
Mar 17, 2020
Messages
2
Reaction score
0
Age
37
Hi there,

I have crashed my P3Pro and it seems battery failed see attached log, but I have heard some people get lower voltage then mine 11V and aircraft still was ok anyway I broke gimbal arm and wire tape, ordered repaired. Now Drone is connecting to the remote control fine I can see live picture from camera and gimbal works as before but get lound beeping sound just after switching on the aircraft same as this guy here
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
. I have followed steps he showed without success, after few minutes my light go solid red on the gimbal.

What I noticed my battery seems ok I can charge it and light bars works fine but there is no data when checking on DJI GO App it shows 0% on all cells 0V all options seems disable.
Rest looks fine I can format SD GPS ok etc via DJI GO App

From SD Card hidden file "P3X_FW_LOG_AB" I have noticed few modules not deceted as showed below, but for some people in similar case reinstal firmware helped:

[00012604]========== remo-con disconnect. boot(15) ============
[00012681]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xe4dd0630].
[00012753]Packet upgrade start...

[00012836]Packet checking...
[00012908]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012985]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013059]Done.

[00013127]Version checking[1]...
[00025701][03 06][00] device not detected.
[00038271][03 05][00] device not detected.
[00038478][04 00][00] v1.48.0.0 -> v1.48.0.0
[00051052][11 00][00] device not detected.
[00063621][11 01][00] device not detected.
[00076200][12 00][00] device not detected.
[00088774][12 01][00] device not detected.
[00101348][12 02][00] device not detected.
[00113930][12 03][00] device not detected.
[00114095][15 00][00] v1.1.2.0 -> v1.1.2.0
[00126661][17 00][00] device not detected.
[00139231][17 01][00] device not detected.
[00139325][19 00][00] v1.0.8.96 -> v1.0.8.96
[00139395][01 00][00] v1.32.5432 -> v1.32.5432
[00139471][01 01][00] v1.32.5432 -> v1.32.5432
[00139561][08 00][00] v0.13.0.7 -> v0.13.0.7
[00139665][09 00][00] v4.1.0.0 -> v4.1.0.0
[00139735]Packet upgrade failed at version checking.


Do you thing that can be just battery problem and that is why I get very lound beeping, and can not get it working?

Thx in advance
 

Attachments

  • DJIFlightRecord_2018-08-23_[17-51-50].txt
    1.8 MB · Views: 273
  • P3X_FW_LOG_AB.txt
    22.8 KB · Views: 200
I have crashed my P3Pro and it seems battery failed see attached log, but I have heard some people get lower voltage then mine 11V and aircraft still was ok anyway
When was the crash?
The flight record is dated August 2018: DJI Flight Log Viewer - PhantomHelp.com
The flight record shows a warning at 17:08.8 when you were climbing and flying at full speed: Propulsion output is limited to ensure the health of the battery.
You kept flying out until 18:26.9 where cell voltages showed about 3.5 volts hovering.
Coming back, there were more warnings from 18:54.7 with cell voltages at 3.4V
At 19:30.3 one cell dropped below critical low voltage (3.3v) , the battery level was showing 31%
At 19:39.2 all cells were below critical low voltage and at 19:42.1 all cells were below 3.3V
At 19:42.1 autolanding commenced - Critically Low Voltage. Aircraft will land
The battery level was showing 30%
At 20:21.8 signal was lost when the Phantom was still 113 feet up.
Although the battery level was showing 26%, cell voltages were 2.8-2.6V
The battery level was giving false information.
With cell voltages well below the critical low voltage level of 3.3V, it should have been showing 0%
 
Thanks for reply

I crashed it Aug 2018 repaired gimball arm and left it as it was, I have thought because of modules not detected it is serious damage, then heard people having module not detected problem even without crash so now I am back, maybe there is a chance to repair.

You said

The battery level was giving false information.
With cell voltages well below the critical low voltage level of 3.3V, it should have been showing 0%


Does it mean this is battery problem despite I can charge it without problem?
Battery is from 2015, I did around 70 charge cycles but mayby time (old battery) is crucial here.

I do not get why DJI App can not see any voltage on battery section I can not set critical voltage etc it is just no data.
 

Members online

No members online now.

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,935
Latest member
Pauos31