Welcome,
I am writing to the state with such a large request. After switching Phantom and app / pilot had to register, to name Phantoms etc, this was successful.
After being shown a window with Firmware Update or Skip. I took Update. On the SD card, before the formatted in FAT32, I have uploaded the file .bin latest firmware version from Dji, probably about number 1.9.6. I turned off the drone, I put the SD card. Drone ON, gimbal moved, LEDs blink, drones seem beep, beep, the cam LED flashes red and green. It looks properly update the firmware. After about 15-20 minutes, the drone began to seem constans sound BEEEEEP, the LED does not blink already red and green, only red. The log Update Failed, and more specifically what those of my screenshots: 1. https://s12.postimg.io/pa0rz4x1p/20160831_141005.jpg 2. https://s18.postimg.io/4wxwh8lhl/20160831_141102.jpg
When Throw everything from SD and drone ON is something there loads, app shows a red NO SIGNAL, the screen is black.
Such BEEP constans happening now all the time no matter what version of firmware dam on the SD card, immediately after a while and squeaks continuous sound and the red LED burns over cam.
SORRY MY BAD ENGLISH!
Please help me.
I am writing to the state with such a large request. After switching Phantom and app / pilot had to register, to name Phantoms etc, this was successful.
After being shown a window with Firmware Update or Skip. I took Update. On the SD card, before the formatted in FAT32, I have uploaded the file .bin latest firmware version from Dji, probably about number 1.9.6. I turned off the drone, I put the SD card. Drone ON, gimbal moved, LEDs blink, drones seem beep, beep, the cam LED flashes red and green. It looks properly update the firmware. After about 15-20 minutes, the drone began to seem constans sound BEEEEEP, the LED does not blink already red and green, only red. The log Update Failed, and more specifically what those of my screenshots: 1. https://s12.postimg.io/pa0rz4x1p/20160831_141005.jpg 2. https://s18.postimg.io/4wxwh8lhl/20160831_141102.jpg
When Throw everything from SD and drone ON is something there loads, app shows a red NO SIGNAL, the screen is black.
Such BEEP constans happening now all the time no matter what version of firmware dam on the SD card, immediately after a while and squeaks continuous sound and the red LED burns over cam.
SORRY MY BAD ENGLISH!
Please help me.