Yup I did the upgrade with the uavbits guard on without a problem.I'd defiantly take it off! The camera does a bunch of flipping and bouncing around.
Yup I did the upgrade with the uavbits guard on without a problem.I'd defiantly take it off! The camera does a bunch of flipping and bouncing around.
Everything went fine after I reformatted the SD card. Now to calibrate the IMU etc.
IF the DJI process failed and you have tried again but it wont do it, try this, we worked through this with people on RCG when the last fw was released and it worked in almost all cases
There seems to be a few people having problems upgrading to the latest firmware, Me and several other have been working through it and seem to have come up with a process that work's.
If you have not tried to update your firmware please follow DJI procedure first, that works fine in almost all cases.
If then that fails try the below.
Please try the following as we have worked through this all ready with a few people that could not update and had success. Please don't skip as step
1: Turn off the P3 and remove the battery for 20 minutes. makes sure its charged over 50% at this point.
2: Format the SD card again. Use the one it was supplied with
3:.Download the correct file again from DJI website,
4:.Place the correct .bin file from the new downloaded file on the SD card,
5:Turn on your controller.
6: Connect tablet and open the DJI Pilot app to camera.
7: Insert battery and turn on P3 with out SD card in and see if it connects to controller
8: if it connects then shut the P3 off, if it don't connect leave a few minutes then turn P3 off, don't worry if it does not connect to the app.
9: Close the DJI App but leave the controller turned on,
10: Insert SD card into P3 and turn on and allow software update.
11: Check update text file after its changed to finished tones.
12: Then please post the hidden log file located under the MISC\LOG\ folder on the SD card, you will need to enable I view hidden files and folders on your computer to see it
IF this don't work perform again but this time at step 9 turn the controller off.
If this don't work then it likely got to go back to DJI
Yip no problems. Didn't do imu or compassAnyone flown on the new firmware yet and got any reports for us.
Yip no problems. Didn't do imu or compass
update your link to this --hallo .
I did upgrade my P3A . After 20-25 minutes the sound was D - DD . I turned it off and I formatted the card . When I turned back the phantom does this
https://www.youtube.com/edit?o=U&video_id=q9MK5PtF4gw
Yes, both IMU and gimbal.Are you guys recalibrating imu after this update?
Yes you can use also normal USB stick to controller, just check that it have FAT32 filesystem.Cant you use a USB stick to update the controller nested of using the sd card?
It took me 17 min. in my aircarft apparently.P3P and controller updated without issue. P3P took 20 minutes, Controller took less than 1 minute. Both txt files reported successes. Link remained solid. Both batteries inserted with .bin file in place but no documentation of any upgraded battery firmware reported.
Height Limit Reset
VPS Reset to ON
RTH Height Reset to default
Can't find Low Battery Fail Safe Mode (RTH or "Land here") The normal Control Signal Loss Fail safe is there just can't find the Low Battery fail safe.
Sadly, no. For me there is little bit less lag but i reinstall my tablet to factory settings before test so cannot say how much more than the lag problem is still in the bird.Can anyone confirm if this update fixes the lag problems?
I love firmware update day!!! Makes me feel like all my family is together for the holidays AND they're all drunk and fighting.
Great stuff! I love you guys and gals...... Lmao!
Sent from my XT1080 using Tapatalk
Hi All,
I don't have a P3, just a P2V+. I don't understand the haste to install an upgrade that doesn't really do any thing.
Some have said that they wanted to fly but couldn't because they had to do the upgrade?
Why not do the day's work and then mess with the fw?
Or how many have paid their dues and are enjoying our sweet retirement................. I think one thing a new firmware update tells you is how many are out of work, how many don't have 5 year olds in the house.