- Joined
- Jul 22, 2014
- Messages
- 3
- Reaction score
- 0
I'm hoping someone more experienced can help with a problem that's driving me crazy.
I have a Phantom 2 with a H3-3D gimbal. Set-up included an Immersion RC feeding a BlackPearl 7. Worked FLAWLESSLY. Bought a iSOD mini and a no solder cable. Hooked everything up. I'm getting the feed from the iSOD, but nothing from the GoPro. A few more details :
* I've since swapped out the new cable for the old one -- same problem.
* The GoPro is working. It doesn't feed the FPV, but it's recording.
* The gimbal - in terms of stabilizing - is working fine.
* I've checked, pulled and reset all the cables.
* One wild card is that I also did the gimbal firmware update that recently came through.
Any ideas? This one is driving me absolutely bonkers.
Thanks for the help.
I have a Phantom 2 with a H3-3D gimbal. Set-up included an Immersion RC feeding a BlackPearl 7. Worked FLAWLESSLY. Bought a iSOD mini and a no solder cable. Hooked everything up. I'm getting the feed from the iSOD, but nothing from the GoPro. A few more details :
* I've since swapped out the new cable for the old one -- same problem.
* The GoPro is working. It doesn't feed the FPV, but it's recording.
* The gimbal - in terms of stabilizing - is working fine.
* I've checked, pulled and reset all the cables.
* One wild card is that I also did the gimbal firmware update that recently came through.
Any ideas? This one is driving me absolutely bonkers.
Thanks for the help.