My SR6 controller works like yours Caupwhiting I believe that is normal for them
My SR6 controller works like yours Caupwhiting I believe that is normal for them
My SR6 controller works like yours Caupwhiting I believe that is normal for them
Caupwhiting now you need to give an update on your progress and post a video ok bro!
Did you create an account with DJI & download drivers? I use windows 7 with mineI decided to step back a bit and take a break.
I have tried to get my laptop(s) to recognize the drone but without success. I’ve tried windows 10, 8 and 7.
I’ve also tried to get the drone and controller to communicate. I turn the controller on first, then connect the battery to the drone. Lights begin flashing and eventually I get 4 flashing green lights and 1 yellow. I’m not sure if things are working or not, but I suspect not.
So, that’s where I am. A little frustrated but determined to get this figured out eventually.
Cheers
Did you get a copy of the manual? Did you buy it from someone you know, if you did they could help you get started. If you had green lights that's a good thing! Did you calibrate the compass you don't need a computer to do that! It takes a little to understand the manual helps and the lights tell you everything! Read the flow chart of failsafe. Then the phantom flying flowchart and the led description of the lights and it tells you what they mean. I have a manual and can send you a copy over the internet if you lived near me I could help you with it! Green means regularly situation. I want to find out you have or figured out and your flying! Let me know if you need a copy and stop hooking it up to the computer for now.
I had same problem with firmware try downloading the NAZA drivers for windows first ps are using windows 10Yes.
You might have to go to settings to turn of windows driver signature that’s what I had to do now NAZA is workingI had same problem with firmware try downloading the NAZA drivers for windows first ps are using windows 10
Go to www.howtogeek.com or YouTube type in type in disable windows driver signatureHow do I turn off windows driver signature?
Bought my phantom1 2 months ago for £40 with fpv screen,camera gimble 5 batteries and metal case GREAT DEAL you can fly without using computerWhen done install NAZA driver when all is finished install NAZA without installing update should work after this
Jay just checking on you never heard if you're flying your phantom just wondering!My name is Jay, I’m 64 and new to the hobby. I have never flown a drone. I recently bought a Phantom 1 in excellent condition as far as I can see. I'm finding out that this is fairly old technology but think it will suit my purposes. My plan is to take this with us when my wife and I hike. Think It will be fun to see the area(s) from a birds eye view.
It did not come with a manual so I’m not sure what steps I need to take in order to get it to fly.
Do I need software in order to fly it and not lose it?
I have been watching videos and searching the internet for both flight instructions and software but I’m a little confused about the software I need to install to the drone and to the remote control.
I’m hoping that someone can tell me what software I need for both and where I can get the download(s).
It came with two batteries. I am able to charge one of them, but the charger blinks back and forth from the large red light and one of the smaller red lights. Does this mean the battery is bad?
Thank you,
Jay
I haven't flown it yet. I had to put it away for a while, but have been thinking about flying it on a nice warm day. I think i'll just start it up and see if will fly. Try some simple hovering and landing to get my feet wet so to speak. I will be sure to keep the group posted.Jay just checking on you never heard if you're flying your phantom just wondering!