- Just formatted the sd card using the dji go app
- Added the P3X_FW_V01.11.0020.bin file to sd card on pc
- Plugged the sd card into the drone
- Powered up Remote controller and ipad, connected to the ipad cable, turned on drone; I was able to take a video and picture from the drone with the ipad dji go app
- Constantly beeps
- Gimbal was flashing green/red ultimately turning to red
here are the logs:
P3X_FW_RESULT_AB
========== 2020.09.22 09:37:17 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
P3X_FW_LOG_AB
[00012822]========== 2020.09.22 09:37:17. boot(15) ============
[00012898]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xcb12416a].
[00012975]Packet upgrade start...
[00013060]Packet checking...
[00013140]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013216]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00013291]Done.
[00013372]Version checking[1]...
[00025958][03 06][00] device not detected.
[00038536][03 05][00] device not detected.
[00038626][04 00][00] v1.48.0.0 -> v1.48.0.0
[00051202][11 00][00] device not detected.
[00063778][11 01][00] device not detected.
[00076353][12 00][00] device not detected.
[00088935][12 01][00] device not detected.
[00101514][12 02][00] device not detected.
[00114096][12 03][00] device not detected.
[00114294][15 00][00] v1.1.2.0 -> v1.1.2.0
[00126880][17 00][00] device not detected.
[00139469][17 01][00] device not detected.
[00139581][19 00][00] v1.0.8.96 -> v1.0.8.96
[00139658][01 00][00] v1.32.5432 -> v1.32.5432
[00139735][01 01][00] v1.32.5432 -> v1.32.5432
[00139842][08 00][00] v0.13.0.7 -> v0.13.0.7
[00139940][09 00][00] v4.1.0.0 -> v4.1.0.0
[00140017]Packet upgrade failed at version checking.