phantom 3 standard issue

[captainmilehigh]

Good to hear you got it all sorted out. No need to close the thread. It will just live on in the thousands of other threads before it.

If you have any problems you can't figure out the answers to, just jump on Phantom Pilots Forum and we will try to help fix any issues or answer any questions you may have. Just start a new thread. It's that easy.

Happy Flying..........Blue Skies and Calm Winds..........

 

[RodPad]

Only a mod can official close it.
Your Good!

Actually what happens the newbies see the first post and reply to it. any thread we post on we get an alert.
We get alerts on threads that were four years old.

Looking at @captainmilehigh numbers and when he joined.
I bet he is with me on this.

Over all we all need a pay raise.
Helping out is the DEAL!!

Rod ..

 

[captainmilehigh]

Yeah, Rod.....I agree. There are a bunch of great people here on the forum that love a good drone issue mystery. We were all new at this 'drone thing' at one time too........so no question is off limits. We are here to help.

*Rod......pay?........what pay?...................hahaha....

 

[N3NTJ]

I've heard of other people having the same problem with the Phantom 3's.. .replace one of the motors and they don't properly solder the wires. Glad you got it fixed.

 

[Mdpalmer5074]

hi everyone
i recently went out with my phantom 3 standard which i bought 2 weeks ago after seeing it fly absolutely perfectly and on start up only 3 props were working, the other one ( cw with black spot ) was not spinning, it was stuttering like it wanted to go but didnt ?
i purchased a new motor, connected the wires up and still no movement whatsoever ?
any help greatly appreciated
thank you very much
mark

Did you check the ESC? It sounds like your esc or it’s associated wiring may be the problem, especially since you replaced the motor and still have the same problem

 

[captainmilehigh]

Did you check the ESC? It sounds like your esc or it’s associated wiring may be the problem, especially since you replaced the motor and still have the same problem

The OP fixed the issue back in Feb '24. See post #36.

 

[RodPad]

@Mdpalmer5074
Welcome to the forum (Newbie)

@captainmilehigh
You forgot the welcome part.

Rod ..

 

[RodPad]

@Mdpalmer5074

I started thinking
The P3S?
If you got some got some knowledge on it, I fought many problems.

I recommend do the

Introductions

Introduce yourself and get to know your fellow phantom pilots!

phantompilots.com

I have no reason to post again on this thread that I did not create.

Rod ..

 

[captainmilehigh]

@Mdpalmer5074
Welcome to the forum (Newbie)

@captainmilehigh
You forgot the welcome part.

Rod ..

Yeah, not awake yet.........