- Joined
- Mar 19, 2014
- Messages
- 2
- Reaction score
- 0
Hi all
Brand new Phantom 2 owner and I have setup the H3-2D on the aircraft however the X1 on the back of the DJ6 controller does not appear to be working. I have installed both the RC and PT2 software and confirmed the firmware is up to date on all of them. I did the calibration with the RC software for the A/E/T/R sticks and that worked correctly. However when I move the X1 lever on the back or turn the POT screw on the back nothing changes. (nothing shows as changing in the RC or PT2 software for X1 and the Gimbal is ON in the PT2 software)
The Gimbal does not tilt or change direction and the software does not register any change. It does work because it will stay level when the Phantom is on and it has moved to a different position when I power down and power up the Phantom.
I have read several posts about this but nothing works for me. What would be my next steps??
Thank you for any help for this new guy!
Brand new Phantom 2 owner and I have setup the H3-2D on the aircraft however the X1 on the back of the DJ6 controller does not appear to be working. I have installed both the RC and PT2 software and confirmed the firmware is up to date on all of them. I did the calibration with the RC software for the A/E/T/R sticks and that worked correctly. However when I move the X1 lever on the back or turn the POT screw on the back nothing changes. (nothing shows as changing in the RC or PT2 software for X1 and the Gimbal is ON in the PT2 software)
The Gimbal does not tilt or change direction and the software does not register any change. It does work because it will stay level when the Phantom is on and it has moved to a different position when I power down and power up the Phantom.
I have read several posts about this but nothing works for me. What would be my next steps??
Thank you for any help for this new guy!