When I turn on the Phantom 2 Vision, The camera goes to full down how do I get it to stay level
Rich
Rich
Recalibrate the camera wheel as well.Thanks for the reply Did that and it still goes down on start up
Not that I am aware of RC and that's how I do it > Really not a problem after awhile It's just the normal with me !I have the first Vision with rotorpixel gimbal... Mine points down at startup,... always has since the combination plus/vision firmware was released.
The solution in the past has been to simply hold the control wheel position up during start.(V3 TX with wheel) Has this changed?
what does that mean force restart ,restart what please explain thanksHad the same problem several times some months ago. In DJI Assistant upgrade the camera software even it it says you have the most current version. Force a restart after you "upgrade." I have no idea why this works or even what the actual problem was/is, but the worked perfectly for me every time. I haven't had the problem since.
While the Vision is powered off. Make sure the camera plug on the back of the camera has a good click when you plug it in. Restart the Phantom and Wifi app and try to connect again.Hi To all
I am Fabian my first time on this matter!!
I having some problems with my Wi Fi signal I loose it when start on the motors . Could anybody give me some help?
regards
fabsubs