Hello,
I have a problem with the zenmuse h3-2d on my phantom 1. Let me explain what I did so far and what the problem is.
1. I bought the zenmuse h3-2d with the upgrade kit.
2. Installed the upgrade kit with the help of DJI video's
3. Installed the zenmuse h3-2d
4. powered on to check status: zenmuse works perfect... looking straight forward and does what he needs to do when i move my phantom
5. I instal the lever for the controller
6. power on again to check the controller to make the camera look up or down => doesn't work at all.
7. I start up the assistant software and upgrade my firmware. (I didn't notice that the AS didn't reconize the new board) I try again the lever on my controller... no result. + extra problem: the camera faces straight down!
8. I downgraded the firmware... no change.
9. I found out that i have to use the V2.2 assistant software => upgraded the firmware and found out that the AS now finds the new board! (some improvement) the AS also finds my zenmuse. tough i can not upgrade the firmware of that.
the problems i have now:
gimbal looks straight down when i start up
pitch control doesn't work
can not upgrade the firmware of my gimbal
gimbal assistant software doesn't find any connection with the gimbal
any help would be welcome.
With kind regards
Stijn U.
I have a problem with the zenmuse h3-2d on my phantom 1. Let me explain what I did so far and what the problem is.
1. I bought the zenmuse h3-2d with the upgrade kit.
2. Installed the upgrade kit with the help of DJI video's
3. Installed the zenmuse h3-2d
4. powered on to check status: zenmuse works perfect... looking straight forward and does what he needs to do when i move my phantom
5. I instal the lever for the controller
6. power on again to check the controller to make the camera look up or down => doesn't work at all.
7. I start up the assistant software and upgrade my firmware. (I didn't notice that the AS didn't reconize the new board) I try again the lever on my controller... no result. + extra problem: the camera faces straight down!
8. I downgraded the firmware... no change.
9. I found out that i have to use the V2.2 assistant software => upgraded the firmware and found out that the AS now finds the new board! (some improvement) the AS also finds my zenmuse. tough i can not upgrade the firmware of that.
the problems i have now:
gimbal looks straight down when i start up
pitch control doesn't work
can not upgrade the firmware of my gimbal
gimbal assistant software doesn't find any connection with the gimbal
any help would be welcome.
With kind regards
Stijn U.