P3S repair

[RemarK]

So after a crash my camera came off the aircraft. The white clip is still intact, but the black and grey wires got snapped. I plugged in the white clip and the gimbal seems to function fine from the remote, however I am not getting any video feed. I am curious if this means my camera is shot? Or if the video feed goes thru the black and grey cables that I need to replace?

Sent from my iPhone using PhantomPilots

 

[RemarK]

Worth noting: when powered on the light above the camera is red instead of green.


Sent from my iPhone using PhantomPilots

 

[msinger]

The black and gray wires are the leads from the antenna. You can buy a replacement here on Amazon.

This video shows how those wires connect to the top of the gimbal:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

You'll need to open your Phantom in order to replace the antenna. Here's a video showing how to disassemble it:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[RemarK]

Thanks so much


Sent from my iPhone using PhantomPilots