Newbie here. Just bought a new P4P v2. I have 2 flights so far and I noticed my gimbal is a little to the left yaw wise. I tried the adjustment in the GO 4 app and I can’t seem to correct it. Anybody have any suggestions. It’s probably off maybe 2 or 3 degrees.
1) Try a gimbal calibration in DJI Go4 with the drone tilted and it's rear motors resting on the ground, so the the camera is at 90 degrees pointing upwards.
2) While the drone is off torque the gimbal housing in the opposite direction of the skew, hold onto the turret that is just coming out of the body mount. There is an o-ring that needs to slide a bit to re-orient the camera. You need to go a bit past the point of straight on as you are stretching the o-ring.
Here are some threads on this fix recommend by DJI
Hello! The camera of my Phantom 4 Pro is always looking to the left. How to align the camera? Gimbal calibration has not helped. Updating the firmware has not helped too. Please help me.
Hi, Just bought the 4 pro and I ve just realised that the camera is positioned slightly on the left. Anyone has the same issue? Thanks Sent from my iPad using PhantomPilots
Ok. I’m a little confused with the torque solution. So the drone is off - no power. Turn the gimbal to the right until it stops then gently try to force it past that stop point? Am I understanding this correctly?
Ok. I’m a little confused with the torque solution. So the drone is off - no power. Turn the gimbal to the right until it stops then gently try to force it past that stop point? Am I understanding this correctly?
Yes drone is off
Turn in the direction so the camera is facing straight, you might need to go a tiny bit past the center line to the right as it will spring back a bit once you stop turning it.
It is a tiny adjustment (1-2 degrees) to the right not a huge turn after the resistance point
Ok. The gimbal doesn’t stop at center. It turns to right and left to about 45 degrees. So I’m supposed to try and force it past that stop point to the right?
Ok. I’m a little confused with the torque solution. So the drone is off - no power. Turn the gimbal to the right until it stops then gently try to force it past that stop point? Am I understanding this correctly?
I'll put something off topic but relevant I think. Chosing the title let it be as much as can be about the problem you are talking about. In this thread we've just got the information that we are going to read something about the new Phantom - a Phantom 5 ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.