Need an ESC for my DJI Phantom 3 Pro 4K ..but

[greenline4]

Hi Everyone
I m new in the group and i will appreciate your help.
I Need an ESC mother board for my Drone but very confusing which model I have to buy.
Here is some pictures of mine and I need help to identify the reference of the motherboard I need. i found 3 models 2312A , 2312B, SE etc .....
Thanks a lot

 

[giorgimonk]

Looks like you have earlier models with 2312Motors not the 2312A

 

[greenline4]

Looks like you have earlier models with 2312Motors not the 2312A

SO What ESC i Have to order please ? the 33 or 96 ?

 

[giorgimonk]

SO What ESC i Have to order please ? the 33 or 96 ?

Just by looking at the pictures i think it's the old one part 33 , you need to match the board with motors

 

[giorgimonk]

Here is the new one

 

[giorgimonk]

And old one here

 

[greenline4]

So i beleive i will take the older one... but some persons told me that when the number in the label ( see picture ) ends by A it means that I have to take the motherboard 2312A ... i beleive this is not true... this label has nothing to do with the the type of mothrboard i have to take..i want just to avoid any confusing since the price of the motherboard is expensive..thanks of all your recommandation

 

[SouthTexas&RioGrandeFlyer]

You are looking for DJI Part CP.PT.000219 which is has been discontinued. I needed one last May and had a devil of a time locating a trustworthy source. Search with specific description: DJI ESC Center Board and MC for Phantom 3 Professional and Advanced (Part 33).

MAKE CERTAIN the board you purchase is for a Phantom 3 Pro (not Phantom 3) and specifies for motors 2312 (not 2312A).

Finding the board is hard. Replacing it is easy.

Good luck!

 

[greenline4]

Thanks a lot for your help.. really appreciated
I found this one .. i beleive it s the right one.

Thanks again

 

[SouthTexas&RioGrandeFlyer]

Thanks a lot for your help.. really appreciated
I found this one .. i beleive it s the right one.

Thanks again

Description is right. Obviously used. But if the seller has a good sales history with plenty of stars, I’d pull the trigger.

 

[KachemakDiver]

There is a seller on eBay that has NEW #33 motherboard for $169.00. I have bought 2 from them,very trustworthy. The name of the seller is rotor-logic and they are in California. My opinion, don’t trust used motherboards from China.

 

[quado]

the mosfet / mosfets burns out on the mother board so this causes the esc / motor problems
if you also fit the wrong motor this will draw to much power from the mosfets and cause them to burn out
i have the means for replacing them this saves having to buy a whole new mother board (saving ££££££ / $$$$$$$ )